Skip to the content
Know your tech before you buy it. Makers: get listed from $49/mo

amdgpu-clocks

github.com

  • Free plan
  • Linux
7.2 Club score Visit github.com

What amdgpu-clocks is

amdgpu-clocks is a free, GPL-2.0-licensed Linux script for changing power states on AMD GPUs that use the amdgpu kernel driver. It can adjust GPU and memory clocks, voltages, clock limits, power caps, performance levels, and power profiles when the hardware exposes those controls. Its README lists Polaris, Vega, Navi, and RDNA cards as supported; Vega GPUs in AMD APUs lack the required API. Multiple cards can be managed using state files selected by card identifier or PCI address. Users define settings in files under /etc/default. Fine-grained controls require Radeon OverDrive to be enabled in the kernel. For RDNA 3 and later, the script can manage driver-exposed Zero RPM fan settings, which require Linux 6.13 or newer; stop-temperature control is limited to RDNA 3. A systemd service can apply settings at startup, and a resume script can reapply them after suspend. A restore option returns settings to initial defaults, except the power profile, which is set to 0. The README directs installation to /usr/local/bin.

Who it suits

It suits Linux users with compatible AMD GPUs who want to configure clocks, voltages, or other exposed power controls. Users of Vega GPUs in AMD APUs should note that the required API is not exposed.

Good to know, and what to watch

  • Controls clocks, voltages, power caps, and profiles where available
  • Can manage multiple AMD graphics cards
  • Can reapply settings at startup and after suspend
  • Restore option returns most settings to initial defaults
  • Requires Linux and an AMD GPU using amdgpu
  • Radeon OverDrive must be enabled in the kernel
  • Zero RPM settings require Linux 6.13 or newer
  • Vega GPUs in AMD APUs lack the required API

Free

Free

Open source

Getting started

  1. Use a Linux system with a compatible AMD GPU
  2. Enable Radeon OverDrive in the kernel using the project’s amdgpu.ppfeaturemask guidance
  3. Install the script in /usr/local/bin
  4. Create custom state files under /etc/default
  5. Select a card by identifier or PCI address when managing multiple GPUs
  6. Enable the supplied systemd service or resume script if needed

Limits to check

The script requires Linux, a compatible AMD GPU, and Radeon OverDrive for fine-grained controls. Zero RPM fan settings require Linux 6.13 or newer, and Zero RPM stop temperature is limited to RDNA 3.

The verdict

amdgpu-clocks offers detailed power-state controls through configurable files and can restore most settings or reapply them after system events. Check GPU compatibility and the Radeon OverDrive prerequisite before relying on its controls.

Questions people ask

Which GPUs does amdgpu-clocks support?

The README says it should work with Polaris, Vega, Navi, and RDNA cards. Vega GPUs in AMD APUs do not expose the required API.

What can the script configure?

It can set GPU and memory clocks, voltages, power caps, performance levels, and power profiles where the hardware exposes those controls.

Can it manage more than one AMD card?

Yes. Multiple cards can be managed with state files selected by card identifier or PCI address.

What license and price apply?

It is free and open source under the GPL-2.0 license.

How are settings applied after reboot or suspend?

A provided systemd service can apply custom states at startup, and a resume script can reapply them after suspend.

What are the Zero RPM requirements?

Zero RPM settings are available for RDNA 3 and newer cards and require Linux 6.13 or newer. Zero RPM stop temperature is available only for RDNA 3.

What the maker publishes

Configuration
Users define custom states in files under /etc/default, with support for clock limits, power caps, performance levels, and power profiles. source
Configuration
Users define custom power states in configuration files under /etc/default, with options to identify cards by PCI address. source
Controls
It can set GPU and memory clocks, voltages, and other power state parameters. source
Distribution
The README instructs users to install the script in /usr/local/bin; the GitHub releases page says there are no releases. source
Distribution
The README instructs users to place the script in /usr/local/bin and run it with sudo; it does not list packaged downloads or a commercial pricing page. source
Fan controls
For RDNA 3 and newer, it can read, store, and set Zero RPM fan settings exposed by the driver. source
GPU controls
It can set custom GPU and memory clocks, voltages, power caps, performance levels, and power profiles where hardware exposes those controls. source
GPU support
The README says it should work with Polaris, Vega, Navi, and RDNA cards, while noting that Vega GPUs in AMD APUs do not expose the required API. source
Kernel requirement
Zero RPM fan mode settings require Linux 6.13 or newer, and Zero RPM stop temperature is available only for RDNA 3. source
License
The repository identifies its license as GPL-2.0. source
License
The repository identifies the project as GPL-2.0 licensed. source
Maintainer
The GitHub profile names the maintainer Samir Ibradžić and lists Japan as the location. source
Multi-GPU
The script can manage multiple AMD graphics cards, with custom state files selectable by card identifier or PCI address. source
Multi-GPU
The script can manage multiple AMD graphics cards. source
OverDrive prerequisite
Radeon OverDrive must be enabled in the kernel for the fine-grained power-state controls the script uses. source
Persistence
A provided systemd service can apply custom states at startup, and a resume script can reapply them after suspend. source
Persistence
A provided systemd service can apply custom states at startup; the README says suspend requires installing a separate resume helper because the service does not auto-restart. source
Purpose
amdgpu-clocks is a script for setting custom power states on AMD GPUs driven by the amdgpu Linux kernel driver. source
Purpose
A script for setting custom power states on recent AMD GPUs driven by the amdgpu Linux kernel driver. source
Requirements
Radeon OverDrive must be enabled in the kernel, and the README gives amdgpu.ppfeaturemask boot options for enabling it. source
Restore
The script has a restore option that returns states to their initial defaults, except pp_power_profile_mode, which it sets to 0. source
Restore option
The script supports a restore parameter to return states to their initial defaults, except the power profile, which is set to 0. source
Supported GPUs
The README says it should work with Polaris, Vega, Navi, and RDNA cards, while Vega GPUs in AMD APUs do not expose the required API. source
Zero RPM
For RDNA 3 and newer, it can read, store, and set Zero RPM fan settings; the README says these require Linux 6.13 or newer. source

Checked against the maker's pages on 5 Oct 2026.