Skip to the content
Know your tech before you buy it. Makers: get listed from $49/mo

Apache Mynewt

mynewt.apache.org

  • Free plan
  • Windows
  • macOS
  • Linux
  • Self-hosted
7.4 Club score Visit mynewt.apache.org

What Apache Mynewt is

Apache Mynewt is a real-time operating system and development toolkit for embedded systems, intended for embedded and higher-level application developers. It is designed for Cortex-M0–M4, MIPS, and RISC-V microcontrollers, with a hardware abstraction layer and board support packages. Wireless and networking options include BLE 5, Bluetooth Mesh, LoRaWAN, TCP/IP, UDP, CoAP, and 6LoWPAN. NimBLE can run as a full stack, host only, or controller only, with up to 2 Mbps throughput and 32+ concurrent connections. Mynewt includes remote firmware image management, logging, component and network statistics, and a sensor framework. It also describes device discovery and management using OIC 1.1. Newt combines source package management with building, debugging, and installing embedded applications. Security features include device identity, secure boot, authenticated and encrypted communications, and secure over-the-air updates. The project is free and open source under Apache License 2.0. Newt installation instructions cover macOS, Linux, and Windows; simulator support has documented platform limits.

Who it suits

It suits embedded and higher-level application developers building for supported microcontrollers. The project describes uses ranging from constrained devices such as doorbells to medical devices and power grids.

Good to know, and what to watch

  • Supports Cortex-M0–M4, MIPS, and RISC-V microcontrollers
  • Includes BLE, Bluetooth Mesh, LoRaWAN, and networking stacks
  • Newt supports building, debugging, and installing applications
  • Security features include secure boot and encrypted communications
  • Free and open source under Apache License 2.0
  • Simulator has documented limits on Windows and newer macOS
  • Simulator runs natively only on listed platforms

Apache Mynewt

Free

Open source

Getting started

  1. Open the Apache Mynewt website
  2. Install Newt on Linux, macOS, or Windows
  3. Select a supported Cortex-M0–M4, MIPS, or RISC-V board
  4. Use Newt to obtain source packages and build the application
  5. Debug and install the embedded application
  6. Configure the required wireless, networking, and security components

Limits to check

The simulator runs natively on Linux, FreeBSD, and older macOS versions; the project documents simulator limitations on Windows and newer macOS. Mynewt targets the listed Cortex-M0–M4, MIPS, and RISC-V microcontroller families.

The Club's review

Overview

Apache Mynewt is an open-source real-time operating system and development environment for embedded devices. It is best suited to developers building connected applications for supported microcontrollers, especially when they need networking and firmware-management capabilities alongside the OS. Its breadth is a strength, but hardware and simulator compatibility should shape the choice early.

Newt brings source package management together with building, debugging and installing embedded applications. That integrated workflow is useful for teams developing firmware across its lifecycle, rather than looking for an OS alone. Mynewt is licensed under Apache License 2.0 and is intended for constrained uses ranging from doorbells to medical devices and power grids.

The target set includes Cortex-M0–M4, MIPS and RISC-V microcontrollers, supported through a hardware abstraction layer and board support packages. That focus gives projects in those families a clear starting point, but does not remove the need to confirm support for the specific board and peripherals.

Key features

Networking and Bluetooth

Mynewt supports BLE 5, Bluetooth Mesh, LoRaWAN, TCP/IP, UDP, CoAP and 6LoWPAN. This range makes it relevant to connected-device projects with different link and network requirements, rather than limiting it to a single wireless path. NimBLE can be configured as a full stack, host only or controller only; it supports throughput up to 2 Mbps and more than 32 concurrent connections. Those options help teams tailor the Bluetooth implementation, though the stated ceilings still need to suit the application.

Device operations and security

Image management supports remote firmware updates, while logging, component and network statistics, and a sensor framework cover several ongoing device tasks. The project also describes automatic discovery and management through OIC 1.1, the Open Connectivity Foundation's IoT platform standard. Together these capabilities are useful when devices must be maintained and observed after deployment, not merely booted.

Security features include device identity, secure boot, authenticated and encrypted communications, and secure over-the-air updates. This is a substantial set of building blocks for connected products, but projects still need to determine how those mechanisms fit their device and operational requirements.

Pricing

Apache Mynewt costs nothing. The plan includes the open-source embedded OS and development tools under Apache License 2.0, with no paid tier or free-trial period described. It suits developers who want to work with the source and tooling without a software license charge; hardware and engineering costs remain separate considerations.

Platforms

Newt installation instructions cover macOS, Linux and Windows. The simulator runs natively on Linux, FreeBSD and older macOS versions, while Windows and newer macOS have documented simulator limits. That distinction matters: installing the development toolchain does not mean simulator support is equivalent across desktop platforms. Developers on affected systems should check whether their workflow can accommodate those limits.

Mynewt is an edge deployment option, with Apache Mynewt as its supported device OS. The project directs users and contributors to its dev mailing list for questions, discussion and help.

Who it's for

Mynewt is a strong candidate for embedded developers whose target hardware falls within its supported microcontroller families and who need a broad set of networking protocols, Bluetooth configuration choices, and device-operation features in one open-source project. It is less suitable when a project depends on a target outside those families or on a simulator workflow constrained by Windows or newer macOS.

Pros and cons

Pros

  • Broad connectivity: BLE 5, Bluetooth Mesh, LoRaWAN and several IP-based protocols support a range of connected-device designs.
  • Configurable NimBLE: Full-stack, host-only and controller-only modes let developers choose the Bluetooth components their design needs.
  • Firmware and operational tools: Remote image management, logging, statistics and a sensor framework address work beyond initial development.
  • Open-source licensing and tooling: The free Apache 2.0 project includes Newt for package management, building, debugging and installation.

Cons

  • Hardware focus is specific: Its stated microcontroller families make board and component compatibility an important gate for adoption.
  • Simulator support varies: Documented limits on Windows and newer macOS can complicate development workflows on those platforms.
  • Help is community-directed: Questions and discussion go through the dev mailing list, which may not suit teams that need a different support arrangement.

Alternatives

Explore the IoT Operating Systems category to compare options. Contiki-NG is another free, open-source operating system, with a 3-clause BSD license; consider it when that licensing choice is a better fit.

Particle Device OS offers a free tier capped at 100 devices and 100K Data Operations per month, as well as a paid Basic plan at $299 a month, billed in blocks of 100 devices. It may fit projects that want a freemium device platform with a stated device and monthly operations allowance. PX5 RTOS offers paid licensing, including a one-time device/product license starting at $5,000 with a perpetual license, full source code, no royalties and professional support; consider it when those terms and support are priorities.

Micrium OS is another free option. VxWorks has a free plan for up to three seats online. Azure Sphere OS is a paid solution that combines a certified MCU, OS license and security-service access. PikeOS is a paid option, while RT-Thread offers a free plan.

Verdict

Choose Apache Mynewt if you are building connected embedded devices on its supported microcontroller families and value a free OS with broad networking, device-management features and an accompanying firmware toolchain. Look elsewhere if your hardware falls outside that focus or your development depends on a simulator environment constrained by your desktop platform.

The verdict

Mynewt pairs an embedded operating system with networking stacks and development tools. Its microcontroller targets and simulator limitations are worth checking against a project's hardware and development environment.

Questions people ask

Is Apache Mynewt free?

Yes. The listed plan costs nothing. It is open source under Apache License, version 2.0.

Which developer platforms are supported?

Newt installation instructions are provided for macOS, Linux, and Windows.

What devices can Mynewt target?

It is designed for Cortex-M0–M4, MIPS, and RISC-V microcontrollers, with hardware abstraction and board support packages.

What wireless protocols are included?

Support includes BLE 5, Bluetooth Mesh, LoRaWAN, TCP/IP, UDP, CoAP, and 6LoWPAN.

Does it support remote updates?

Yes. Mynewt includes image management for remote firmware updates and secure over-the-air updates.

Where can users get help?

The project directs users and contributors to its development mailing list for questions, discussion, and help.

What the maker publishes

Build tooling
Newt combines source package management with building, debugging, and installing embedded applications. source
Developer platforms
Newt installation instructions are provided for macOS, Linux, and Windows; the simulator runs natively on Linux, FreeBSD, and older macOS versions, with documented simulator limits on Windows and newer macOS. source
Device discovery
The project describes auto-discovery and management using OIC 1.1, the IoT platform standard from the Open Connectivity Foundation. source
Device operations
Mynewt includes image management for remote firmware updates, logging, component and network statistics, and a sensor framework. source
Downloads
The download page lists Apache Mynewt Core 1.15.0 and Apache NimBLE 1.10.0, both released July 21, 2026. source
Hardware support
Mynewt is designed for Cortex-M0–M4, MIPS, and RISC-V microcontrollers, with a hardware abstraction layer and board support packages. source
Intended use
The project describes Mynewt as suitable for constrained embedded applications ranging from doorbells to medical devices and power grids. source
License
Apache Mynewt is available under the Apache License, version 2.0. source
NimBLE
The NimBLE implementation supports full-stack, host-only, or controller-only configurations, up to 2 Mbps throughput, and 32+ concurrent connections. source
Purpose
Mynewt OS is a real-time operating system for embedded systems, aimed at embedded and higher-level application developers. source
Security
Security features described by the project include device identity, secure boot, authenticated and encrypted communications, and secure over-the-air updates. source
Support
The project directs users and contributors to the dev mailing list for questions, discussion, and help. source
Wireless stacks
The project offers BLE 5, Bluetooth Mesh, LoRaWAN, TCP/IP, UDP, CoAP, and 6LoWPAN support. source

Checked against the maker's pages on 4 Oct 2026.