BMC64
github.com
- Free plan
- Self-hosted
What BMC64 is
BMC64 is a free bare-metal Commodore 64 emulator for Raspberry Pi. Its bundled release also emulates the C128, VIC-20, Plus/4, and PET, with C64 PAL and NTSC variants. It uses VICE, while Raspberry Pi 3 users can select Plus4Emu for more accurate Plus/4 emulation. The project times frames to 50/60 Hz displays for smooth scrolling and advertises low input-to-audio/video latency. It reports a 4.1-second C64 boot over composite and says no shutdown sequence is required. Wi-Fi and Ethernet support activities such as BBS access and C64 OS networking. Supported input includes USB plug-and-play devices and 8BitDo Retro Keyboards via USB or a 2.4 GHz receiver. Installation involves writing a release ZIP or image to a FAT32 SD card. Users must provide the required ROM files from a legal source; the emulator cannot start without the minimum C64 ROM set. An optional local-network web interface for C64 and C128 shows status and manages SD-card files, with PIN protection available. The web server is off by default.
Who it suits
BMC64 suits people with a supported Raspberry Pi who want to emulate classic Commodore machines. Users need to supply ROM files and install the release on a FAT32 SD card.
Good to know, and what to watch
- Emulates C64, C128, VIC-20, Plus/4, and PET.
- Supports Wi-Fi and Ethernet.
- Optional web interface can be PIN-protected.
- Free for supported Raspberry Pi boards.
- Raspberry Pi 4 and later are unsupported.
- Required ROM files must be supplied separately.
- USB Bluetooth gamepads are not directly supported.
Plans
Every plan and priceBMC64
Free plan
The verdict
BMC64 offers several Commodore machine emulations on Raspberry Pi Zero through Pi 3, with network connectivity and an optional local web interface. Check board and input-device compatibility, and obtain the required ROM files before installation.
What the maker publishes
- Boot
- The project reports a 4.1-second C64 boot over composite and says no shutdown sequence is required. source
- Connectivity
- It supports Wi-Fi and Ethernet for uses such as BBS access and C64 OS networking. source
- Display and latency
- It times frames to vsync for 50/60 Hz smooth scrolling and advertises low input-to-audio/video latency. source
- Emulation engines
- It uses VICE, with Plus4Emu offered for more accurate Plus/4 emulation on Raspberry Pi 3. source
- Gamepad limit
- USB Bluetooth gamepads are not supported directly, and the project says not all gamepads work. source
- Input devices
- It supports USB plug-and-play and 8BitDo Retro Keyboards over USB or a 2.4 GHz receiver. source
- Installation
- Installation uses a release ZIP or image written to a FAT32 SD card for a supported Raspberry Pi. source
- Limits
- It supports Pi Zero, Zero 2W, Pi 2 and Pi 3 devices; Raspberry Pi 4 and later are unsupported. source
- Other machines
- The bundled release also supports C128, VIC-20, Plus/4 and PET emulation. source
- Purpose
- BMC64 is a bare-metal Commodore 64 emulator for Raspberry Pi. source
- ROM requirement
- Users must supply required ROM files from a legal source, and BMC64 cannot start without the minimum C64 ROM set. source
- Security setting
- The web server is off by default, and the documentation recommends disabling it when it is not in use. source
- Support
- The project points users to its official Discord community for support and discussion. source
- Web interface
- An optional local-network web UI for C64 and C128 shows status and manages SD-card files, and can be protected with a PIN. source
Checked against the maker's pages on 8 Oct 2026.