Skip to the content
Know your tech before you buy it. Makers: get listed from $49/mo

DANM

github.com

  • Free plan
  • Linux
  • Self-hosted
6.9 Club score Visit github.com

What DANM is

DANM is a free, self-hosted network management suite for Kubernetes, originally developed as Nokia’s TelCo-grade solution. Its CNI metaplugin can provision multiple network interfaces to a Pod and delegate their setup to other CNI plugins. Built-in IP address management supports dynamic, static, or no allocation for IPv4 and IPv6, with up to 8 million allocations per network object. DANM’s IPVLAN CNI provisions L2 IPVLAN interfaces and supports routes and policy-based routes in Pod network namespaces. Documented integrations include Intel SR-IOV and MACVLAN, with delegation to Calico and Flannel. Production-grade mode provides TenantNetwork and ClusterNetwork APIs for managing shared network resources and tenant access. An optional Svcwatcher extends Kubernetes Service discovery across a Pod’s network interfaces. A webhook validates DANM API objects and connects tenant networks to administrator-configured physical interface profiles. Users must create their own Kubernetes cluster and install DANM manually. Its deployment guide says it was tested with Kubernetes 1.17.x and does not officially support versions earlier than 1.9.x.

Who it suits

DANM may suit administrators setting up network management for Kubernetes clusters on Linux. Its documentation distinguishes lightweight management for new users or single-tenant clusters from production-grade management for tenant and administrator roles.

Good to know, and what to watch

  • Free under the 3-Clause BSD License.
  • Supports dynamic, static, or no IPv4 and IPv6 allocation.
  • Can provision multiple network interfaces to a Pod.
  • Integrates with Intel SR-IOV and MACVLAN.
  • Production mode includes tenant and cluster network APIs.
  • Requires users to create a cluster and install it manually.
  • Deployment guide says there is no Docker container release.
  • Guide identifies Kubernetes 1.17.x as tested.

DANM

Free

Free plan

Getting started

  1. Create a Kubernetes cluster on Linux
  2. Review the deployment guide for your Kubernetes version
  3. Install DANM manually in the cluster
  4. Configure CNI integrations and network resources
  5. Apply TenantNetwork or ClusterNetwork APIs when using production-grade mode

Limits to check

DANM is always free. The deployment guide identifies Kubernetes 1.17.x as tested and says versions earlier than 1.9.x are not officially supported.

The Club's review

DANM is a Kubernetes network management suite for Linux clusters, with tools for configuring Pod networking and allocating shared resources to tenants. It suits teams that need multiple network interfaces or administrator-managed tenant networks; it is less compelling for users who want a turnkey deployment or current-version compatibility guarantees.

Overview

Originally developed as a TelCo-grade solution at Nokia, DANM brings several networking functions together in a self-hosted Kubernetes deployment. Its free, 3-Clause BSD-licensed software avoids license costs, but does not remove the operational work: users must create a cluster and install DANM manually.

The project offers a lightweight mode for new users or single-tenant clusters, as well as a production-grade mode for clusters with separate tenant and administrator roles. That range is useful, though adopting it means taking responsibility for cluster setup and checking compatibility: the deployment guide says DANM is tested with Kubernetes 1.17.x and does not officially support versions earlier than 1.9.x.

Key features

  • Multiple Pod interfaces: The CNI metaplugin can provision several network interfaces for a Pod and delegate setup to other CNI plugins. This is useful when a workload needs distinct network attachments rather than a single interface.
  • Flexible IP address management: Built-in IPAM supports dynamic, static, or no allocation for IPv4 and IPv6, with up to 8 million allocations per network object. That breadth accommodates different address-management policies, while the allocation ceiling matters when planning unusually large networks.
  • IPVLAN and CNI integrations: DANM’s IPVLAN CNI provisions L2 IPVLAN interfaces and supports routes and policy-based routes in Pod network namespaces. Its documentation also describes integration with Intel SR-IOV and MACVLAN, and delegation to Calico and Flannel.
  • Tenant resource management: Production-grade mode adds TenantNetwork and ClusterNetwork APIs. Administrators can manage shared network resources while tenants use the resources allocated to them, a clear fit for clusters that need this division of responsibility.
  • Service discovery across interfaces: Optional Svcwatcher extends Kubernetes Service discovery across all network interfaces of a Pod. It addresses a limitation of multi-interface networking, but remains an optional component to deploy.
  • Validation and controls: A webhook validates DANM API objects and connects tenant networks to administrator-configured physical interface profiles. Deployment instructions call for a Kubernetes service account with RBAC roles, and the webhook uses certificates.

Pricing

DANM is free: its DANM plan costs nothing and is always free. There are no paid tiers, seat charges, or trial terms in this plan; the project is licensed under the 3-Clause BSD License. The trade-off is operational rather than financial: users provide and manage their own Kubernetes cluster and install the software themselves.

Platforms

DANM runs on Kubernetes on Linux and is deployed to a self-hosted cluster. It uses Kubernetes CRD/API resources and is a CNI plugin. Teams should verify the guide’s stated compatibility with Kubernetes 1.17.x before adoption rather than assume support for newer releases.

Who it's for

DANM is a strong fit for Kubernetes operators who need multiple Pod interfaces, flexible IPv4 and IPv6 allocation, or a defined way to share network resources between administrators and tenants. The lightweight mode also gives single-tenant clusters a route to network management without requiring tenant roles.

It is a weaker choice for teams that cannot take on manual installation, need a managed service, or require an explicit compatibility commitment for a Kubernetes release beyond the guide’s tested version. The project README invites users to join its Slack community and discuss networking requirements with maintainers, which offers a channel for questions but does not replace deployment ownership.

Pros and cons

Pros

  • One system covers several network needs: Multiple interfaces, route support, IPAM choices, and CNI delegation make DANM useful for workloads with more demanding Pod networking requirements.
  • Tenant controls are built into the production mode: TenantNetwork and ClusterNetwork APIs let administrators allocate shared resources without giving up the tenant distinction.
  • No license cost: The always-free plan and 3-Clause BSD license make it possible to use the software without a paid subscription.

Cons

  • Installation is manual: Users must create their own cluster, and the deployment guide says there is no Docker container release. This adds setup work for teams seeking a ready-made deployment.
  • Compatibility needs careful checking: The guide names Kubernetes 1.17.x as tested, which leaves teams on other releases with a decision to make before deployment.
  • Self-hosting remains the user’s responsibility: DANM provides networking management, not a managed cluster, so operators must handle the environment in which it runs.

Alternatives

Pick Canal if its free, open-source Kubernetes networking option better fits your needs. Calico Open Source is another free option, with community-driven support and maintenance, in-memory data retention, and unlimited clusters. Consider Kube-router for a free, open-source Kubernetes networking solution.

Network Service Mesh is a free alternative identified as a CNCF sandbox project. Spiderpool is a free, Apache License 2.0 Kubernetes networking solution. Terway is free, but trunking is unavailable in self-hosted clusters.

VMware Workstation Pro is also listed as free software for 64-bit Intel or AMD Windows or Linux hosts, with no subscription or license key required. Aviatrix Kubernetes Firewall offers a 30-day free trial and is a paid alternative.

For a broader comparison, see Container Networking Software.

Verdict

Choose DANM if your Linux Kubernetes cluster needs flexible Pod networking and a way to manage tenant access to shared network resources without license costs. Its range of networking functions is the main reason to consider it; manual deployment and the guide’s stated compatibility are the main reasons to look elsewhere if your team needs a turnkey option or a clearly supported newer Kubernetes release.

The verdict

DANM offers flexible Pod networking and tenant resource management for Kubernetes, at no license cost. Deployment is manual, and users should check the guide’s stated Kubernetes compatibility before adopting it.

Questions people ask

Is DANM free?

Yes. The DANM plan is free and is always free for Kubernetes network management.

Where does DANM run?

It runs on Kubernetes on Linux through a self-hosted cluster deployment.

Which CNI plugins can DANM work with?

Documentation describes Intel SR-IOV and MACVLAN integration, with delegation to Calico and Flannel.

What IP versions and allocation modes are supported?

Built-in IPAM supports IPv4 and IPv6 with dynamic, static or no allocation, up to 8 million allocations per network object.

Is DANM open source?

The project is licensed under the 3-Clause BSD License.

What the maker publishes

CNI integrations
The documentation describes integration with Intel SR-IOV and MACVLAN, and delegation to CNIs including Calico and Flannel. source
Deployment requirement
Users create their own Kubernetes cluster and install DANM manually; the deployment guide says the project has no Docker container release. source
Founded
2015 source
Intended users
The documentation presents lightweight network management for new users or single-tenant clusters and production-grade management for clusters with tenant and administrator roles. source
IP address management
Built-in IPAM supports dynamic, static, or no IP allocation for IPv4 and IPv6, with up to 8 million allocations per network object. source
Kubernetes compatibility
The deployment guide says DANM is tested with Kubernetes 1.17.x and does not officially support versions earlier than 1.9.x. source
Kubernetes services
The optional Svcwatcher extends Kubernetes Service discovery to work across all network interfaces of a Pod. source
License
The project is licensed under the 3-Clause BSD License. source
Multiple interfaces
Its CNI metaplugin can provision multiple network interfaces to a Pod and delegate setup to other CNI plugins. source
Network interfaces
DANM’s IPVLAN CNI provisions L2 IPVLAN interfaces and supports routes and policy-based routes in Pod network namespaces. source
Purpose
DANM is an end-to-end network management suite for Kubernetes, originally developed as Nokia’s TelCo-grade solution. source
Security controls
DANM deployment instructions call for a Kubernetes service account with RBAC roles, and the webhook deployment uses certificates. source
Support and community
The project README invites users to join its Slack community and says maintainers are happy to discuss networking requirements. source
Tenant management
Production-grade mode provides TenantNetwork and ClusterNetwork APIs so administrators can manage shared network resources and tenants can use resources allocated to them. source
Validation and resource assignment
The webhook validates DANM API objects and connects tenant networks to administrator-configured physical interface profiles. source

Checked against the maker's pages on 7 Oct 2026.