Fan Control
getfancontrol.com
- Free plan
- Windows
What Fan Control is
Fan Control is free Windows software for setting how CPU, GPU, and case fans respond to system temperatures. It supports hardware from multiple vendors, including motherboards, graphics cards, and AIOs, though compatibility depends largely on the underlying sensor libraries and plugins. Guided setup is available on first launch, and users can save, edit, and load multiple profiles. Fan behavior can be shaped with curve types such as RPM, Linear, Graph, Mix, Trigger, Flat, Sync, and Auto. Calibration and tuning options include response time, hysteresis, RPM avoid zones, step limits, and fan start and stop rules. Custom sensors can combine or average readings, apply offsets, or read temperatures from a file. Third-party .NET plugins can add temperature, speed, or control sensors, with integrations for devices and sources such as Corsair, Home Assistant, and HWiNFO. It supports Windows 10 and 11, with an installer and portable archive available. Laptop support is limited, and modern NVIDIA cards commonly enforce a 30% minimum fan command.
Who it suits
Fan Control suits Windows users who want detailed control over CPU, GPU, and case fan behavior, especially when their hardware is supported by its sensor backend or a plugin. Laptop owners should check model-specific plugin support before relying on it.
Good to know, and what to watch
- Controls CPU, GPU, and case fans.
- Offers seven documented curve types.
- Profiles can be saved, edited, and loaded.
- Custom sensors can combine readings and apply offsets.
- Third-party .NET plugins can add sensor types.
- Laptop support is mostly unavailable.
- Hardware compatibility depends on upstream libraries and plugins.
- NVIDIA cards commonly impose a 30% minimum fan command.
Plans
Every plan and priceFan Control
Free plan
The verdict
Fan Control offers extensive fan tuning and sensor customization at no cost for Windows. Its usefulness depends on hardware compatibility, and laptop support is limited.
What the maker publishes
- Backend
- The maker says the backend is mainly based on LibreHardwareMonitor, an open source fork of OpenHardwareMonitor. source
- Download options
- The release page offers a portable archive and an installer, and lists Scoop, Winget, and Chocolatey installation methods. source
- Fan and hardware support
- It is designed to control CPU, GPU, and case fans, with support for a variety of motherboards, GPUs, and other hardware such as AIOs. source
- Fan coverage
- It controls CPU, GPU, and case fans, with support for a variety of motherboards, GPUs, and other hardware such as AIOs. source
- Fan curves
- The documentation describes seven curve types: RPM mode, Linear, Graph, Mix, Trigger, Flat, Sync, and Auto. source
- Fine tuning
- Users can configure calibration, RPM avoid zones, response time, hysteresis, step up and step down behavior, and fan start and stop logic. source
- GPU caveat
- The documentation says modern NVIDIA GPUs commonly enforce a 30% minimum fan command and that zero RPM depends on the card’s native conditions. source
- GPU limitation
- The documentation says modern NVIDIA GPUs commonly impose a 30% minimum fan command and may only enter zero-RPM mode under the card’s own conditions. source
- Hardware backend
- The maker says the backend is mainly based on LibreHardwareMonitor; the release page also lists LibreHardwareMonitor as the main sensor source. source
- Hardware compatibility
- Compatibility depends largely on upstream hardware libraries, and the maker directs hardware support requests to those projects or to plugin contributions. source
- Hardware limitations
- The maker says laptop support is limited and depends on whether a plugin supports the specific laptop; unsupported devices may show no fans or errors. source
- Integrations
- The plugin list includes integrations for HWInfo, Home Assistant sensors, Thermaltake, Corsair, Aquacomputer, NZXT Kraken, Lian Li, and other devices and sensor sources. source
- Laptop limitation
- The FAQ says laptop support is mostly unavailable, though a plugin may support particular laptop models. source
- Plugins
- Third-party .NET plugins can add temperature, speed, or control sensors, and the release page lists community plugins for devices and sensor sources including Corsair, ASUS, Home Assistant, and HWiNFO. source
- Plugin system
- Third-party developers can extend the software with .NET plugins that add temperature, speed, or control sensors. source
- Profiles
- The release page says users can save, edit, and load multiple profiles. source
- Profiles and setup
- The release page lists guided first-launch setup and the ability to save, edit, and load multiple profiles. source
- Purpose
- Fan Control is highly customizable fan control software for Windows. source
- Purpose
- Fan Control is customizable fan control software for Windows. source
- Security
- The release page says the application, installer, and updater have signed executables, and that version 238 and later no longer ships with WinRing0. source
- Security note
- The release page says Fan Control, its installer, and updater have signed executables, and that version 238 and later no longer ships with WinRing0. source
- Sensor mixing
- Mix curves and custom sensors can combine existing inputs using functions such as maximum, minimum, average, sum, or subtract. source
- Sensors
- Custom sensors can average or combine readings, apply offsets, or read temperature values from a file. source
- Support
- The maker provides documentation and directs hardware compatibility requests to the upstream sensor and driver backend or a compatible plugin. source
Checked against the maker's pages on 8 Oct 2026.