Skip to the content
Know your tech before you buy it. Makers: get listed from $49/mo

Illumine IT disk-benchmark

github.com

  • Free plan
  • Windows
  • Linux
7.1 Club score Visit github.com

What Illumine IT disk-benchmark is

Illumine IT disk-benchmark is a free console program for measuring storage performance. It can benchmark hard drives, SSDs, SAN disks, HBAs, RAID adapters, and storage controllers, including physical or virtual disks that are local or remote. Multiple threads simulate concurrent reads and writes. Test options include random file sizes and delays, write-only runs, and configurable read and write buffer sizes. Results show per-thread and average read and write timings, summaries, CPU time, and wall time. The program can print values for spreadsheet use and show system I/O information to help set buffer sizes. Continuous runs can monitor cloud-drive QoS, disk replication, and active/passive RAID swaps. The project provides Linux and Windows platform availability; its supported-platform list also names POSIX and MS-DOS. Linux build instructions require GCC and list POSIX Threads as the only dependency. The README describes a Windows build with TDM-GCC and provides a 64-bit binary download. It cautions that continuous runs with many threads, large files, and no delay can fill the disk under test and cause high CPU load.

Who it suits

This tool suits administrators and developers who need command-line sequential benchmarks or continuous monitoring of storage behavior. It can test local or remote physical and virtual disks.

Good to know, and what to watch

  • Benchmarks several disk and storage controller types
  • Tests local or remote physical and virtual disks
  • Reports per-thread and average read/write timings
  • Spreadsheet-friendly output and system I/O information
  • Free open-source C command-line tool
  • Does not run random I/O tests
  • Does not measure IOPS or latency
  • Heavy continuous runs can fill the tested disk and raise CPU load

disk-benchmark

Free

Free plan

Getting started

  1. Open the project website on GitHub
  2. Build on Linux with GCC and POSIX Threads
  3. Build on Windows with TDM-GCC or download the 64-bit binary
  4. Choose sequential read/write settings, file sizes, delays, and buffers
  5. Run against a local or remote physical or virtual disk
  6. Review timing, CPU, wall-time, and optional spreadsheet output

Limits to check

The listed plan is free. Continuous runs using many threads, large files, and no delay can consume the tested disk and create high CPU load.

The Club's review

Illumine IT disk-benchmark is a free, open-source C command-line utility for measuring storage behavior across local or remote physical and virtual disks. It is aimed at administrators and technically confident users who need controllable workloads rather than a graphical scorecard, with Linux and Windows builds covering common server and desktop setups.

Its strongest case is configurable, concurrent sequential testing with timing detail per thread and in aggregate. It is less suitable if you need random-I/O, IOPS, or latency metrics, or if you prefer a guided graphical workflow.

Overview

The program targets a broad storage stack: hard drives, SSDs, SAN disks, host-bus adapters, RAID adapters, and storage controllers. Tests can address physical or virtual disks that are local or remote, making it useful for comparing storage paths as well as individual devices. Multiple threads simulate concurrent reads and writes, so results can reflect contention instead of a single-stream transfer.

It is a console tool, and the Linux build requires GCC plus POSIX Threads. On Windows, the project documents a TDM-GCC build and provides a 64-bit binary download. POSIX and MS-DOS are also identified among supported platforms, although the detailed build guidance supplied here focuses on Linux and Windows.

Key features

Configurable sequential workloads

Random file sizes, random delays, write-only mode, and adjustable read/write buffer sizes let you shape a workload around a specific storage question. That is valuable when checking how a disk behaves under different queue-like patterns or transfer settings, but it also puts responsibility on the operator to choose sensible parameters. The tool does not provide random-I/O tests, IOPS measurement, or latency measurement, so it cannot replace a benchmark designed around those indicators.

Detailed and automation-friendly output

Results include read and write timings for each thread, averages, summary values, CPU time, and wall time. A values-only mode is suited to spreadsheet processing, while system I/O information can help determine buffer sizes. These options make repeated runs and operational reporting practical without adding a graphical layer.

Continuous monitoring

Continuous runs are intended for observing cloud-drive quality of service, disk replication, and active/passive RAID swaps. This supports monitoring scenarios that a one-shot benchmark cannot address. The safety warning is material: many threads, large files, and no delay can fill the tested disk and drive CPU usage high. Continuous operation therefore belongs in controlled environments with deliberate limits.

Pricing

PlanPriceWhat it includes
disk-benchmarkFreeOpen-source C command-line tool

There are no paid tiers or seat and quota terms in this plan. The free model suits labs, administrators, and developers who can build or run a command-line utility and do not need commercial packaging. Its trade-off is operational rather than financial: setup and test design are left to the user.

Platforms

Illumine IT disk-benchmark supports Linux and Windows, with POSIX and MS-DOS also listed as supported platforms. Linux users need GCC and POSIX Threads; Windows users can use the documented TDM-GCC route or the supplied 64-bit binary. macOS is not among the supported platforms identified for this entry.

Who it's for

Choose it for infrastructure work involving SAN or RAID paths, virtual disks, replication checks, cloud-drive monitoring, or controller comparisons where concurrent sequential behavior and timing breakdowns matter. It also fits engineers who want values-only output for their own spreadsheets or scripts.

Look elsewhere if your decision depends on random workloads, IOPS, or latency, or if nontechnical users need a visual interface with guided presets. The command-line design and parameter safety requirements make it a poor match for casual, point-and-click benchmarking.

Pros and cons

  • Pros: Tests local or remote physical and virtual disks across several storage layers, so it can cover infrastructure scenarios beyond a single desktop drive.
  • Pros: Multi-threaded reads and writes, configurable sizes and delays, and write-only mode allow workload-specific sequential testing.
  • Pros: Per-thread, average, CPU, and wall-time reporting plus values-only output support analysis and repeatable reporting.
  • Cons: No random-I/O, IOPS, or latency measurements limits its usefulness for performance investigations centered on those metrics.
  • Cons: Continuous high-load configurations can fill the target disk and create high CPU load, so careless parameters carry real operational risk.
  • Cons: A console workflow and compiler-oriented setup require more technical involvement than graphical benchmark utilities.

Alternatives

For a wider selection of benchmark tools, browse Disk Benchmark Software.

  • fio is the stronger alternative when you want a free GNU GPL tool available on Linux, macOS, and Windows.
  • Parkdale suits users who want a free utility spanning Android, macOS, and Windows.
  • ATTO Disk Benchmark is another free option for macOS and Windows.
  • Storage Benchmark Kit fits teams seeking an open-source Apache License 2.0 option across API, Linux, macOS, self-hosted, and Windows environments.
  • D-Bench is a compact free Windows benchmark supporting Windows Vista/7 through Windows 11.
  • DiskBoard is free for Windows 10+ and macOS 10.14+.
  • DaVinci Resolve is a freemium Linux, macOS, and Windows application rather than a dedicated disk benchmark.
  • Buddi is free GPLv2 budgeting software for Linux, macOS, and Windows, not a storage benchmark.

Verdict

Illumine IT disk-benchmark is a good choice for technical users who need scriptable, concurrent sequential tests and transparent timing output across physical, virtual, local, or remote storage. Choose it for infrastructure diagnostics and controlled monitoring; look elsewhere when random-I/O metrics, latency and IOPS, or a graphical experience are central to the decision.

The verdict

Illumine IT disk-benchmark offers configurable sequential storage tests with detailed timing output. Its README warns that continuous high-load settings can fill the tested disk, so test parameters matter.

Questions people ask

What does Illumine IT disk-benchmark cost?

The disk-benchmark plan is free at no cost and is open-source.

Which platforms are supported?

The platform list includes Linux, Windows, POSIX, and MS-DOS. The listed availability specifically names Linux and Windows.

Does it run random I/O tests or measure IOPS?

No. The listed capabilities cover sequential tests and do not include random I/O, IOPS, or latency measurement.

Can it test remote or virtual disks?

Yes. The README describes testing physical or virtual disks that are local or remote.

How are results presented?

It reports per-thread and average read/write timings, summaries, CPU time, and wall time, with optional values-only output for spreadsheets.

What the maker publishes

Concurrent workloads
It simulates concurrent reads and writes using multiple threads. source
Configurable tests
Options include random file sizes, random delays, write-only mode, and configurable read/write buffer sizes. source
Continuous monitoring
The README describes using continuous runs to monitor cloud-drive QoS, disk replication, and active/passive RAID swaps. source
Linux build
The Linux build instructions require GCC and list POSIX Threads as the only dependency. source
Maker
The GitHub organization identifies itself as Illumine IT Consulting and lists Cyprus, Germany, UK, and Greece. source
Output options
It can print values only for spreadsheet use and can print system I/O information to help set buffer sizes. source
Purpose
A lightweight console program for benchmarking hard drives, SSDs, SAN disks, HBAs, RAID adapters, and storage controllers. source
Results
It reports per-thread and average read/write timings, summary results, and CPU and wall time. source
Safety limit
The README warns that continuous tests with many threads, large files, and no delay can fill the tested disk and cause high CPU load. source
Storage coverage
The README says it can test physical or virtual disks that are local or remote. source
Support
The README lists author Michael Mountrakis and an email address for contact. source
Windows build
The README describes building on Windows with TDM-GCC and provides a 64-bit binary download. source

Checked against the maker's pages on 8 Oct 2026.