Skip to the content
Know your tech before you buy it. Makers: get listed from $49/mo

iPerf2

iperf2.sourceforge.io

  • Free plan
  • Open source
  • Windows
  • macOS
  • Linux
  • iPhone and iPad
  • Android
  • Self-hosted

What iPerf2 is

iPerf2 measures network performance by sending traffic from a client to a receiving server. It tests TCP and UDP in one-way, bidirectional, full-duplex, and simultaneous multi-stream configurations. Measurements include throughput, one-way delay, round-trip time, jitter, and packet loss. The tool supports IPv4 and IPv6, plus multicast including source-specific multicast joins; reports can include enhanced metrics and be saved as CSV. The project manual describes an Android client with live throughput, latency, and congestion meters. iPerf2 is available for Android, Linux, macOS, Windows, and self-hosted deployment. Its free Community edition covers TCP and UDP testing, throughput and latency metrics, multicast, and IPv4/IPv6. The free Professional edition includes compile-time features such as permit-key access gating, server-side latency histograms, and UDP L4S support. The manual describes timestamped HMAC-SHA256 permit-key authentication with a configurable replay window. Measurements are made at socket-level reads and writes, so lower-level protocol-header overhead is not counted. iPerf2 and iPerf3 are separate implementations and do not interoperate.

Who it suits

iPerf2 suits people who need to measure network traffic between a client and server, including users working with TCP, UDP, multicast, IPv4, or IPv6. It can also suit teams that want to self-host testing.

Good to know, and what to watch

  • Measures throughput, delay, jitter, and packet loss
  • Tests TCP and UDP in multiple traffic patterns
  • Supports IPv4, IPv6, and multicast
  • Reports can be written as CSV
  • Available for Android, Linux, macOS, and Windows
  • Requires a server and a traffic-generating client
  • Metrics exclude lower-level protocol-header overhead
  • Does not interoperate with iPerf3

Community edition

Free

Iperf 2 open-source edition

Free

Professional edition

Free

Free plan

Getting started

  1. Open the iPerf2 website
  2. Deploy iPerf2 on a supported Android, Linux, macOS, or Windows system
  3. Set up one system as the traffic-receiving server
  4. Set up another system as the traffic-generating client
  5. Choose TCP or UDP and the required traffic direction or stream mode
  6. Run the test and review the reported metrics or CSV output

Limits to check

Tests require a separate server and client. Measurements are taken at socket-level reads and writes, so lower-level protocol-header overhead is excluded.

The verdict

iPerf2 covers a broad range of active network measurements and traffic patterns. Keep its socket-level measurement limit and incompatibility with iPerf3 in mind when planning tests.

Questions people ask

Is iPerf2 free?

Yes. The Community edition and Professional edition are both listed as free.

Which platforms does iPerf2 support?

It supports Android, Linux, macOS, Windows, and self-hosted deployment.

What traffic can it test?

iPerf2 tests TCP and UDP, including unidirectional, bidirectional, full-duplex, and simultaneous multi-stream traffic.

Does iPerf2 support authentication?

The manual describes permit-key HMAC authentication using timestamped HMAC-SHA256 values and a configurable replay window.

What does the Professional edition add?

Its listed features include compile-time permit-key access gating, server-side latency histograms, and UDP L4S support.

What the maker publishes

Android app
The project manual describes an Android client with live meters for throughput, latency, and congestion signals. source
Bounceback testing
The bounceback mode measures request/reply responsiveness and responses per second. source
Company association
Umber Networks identifies Bob McMahon as its founder and says he created and maintains iperf2; the company lists Saratoga, California. source
Current release
The project page identifies version 2.2.2 as the current release dated September 29, 2026. source
Documentation depth
The manual includes installation, configure flags, general/server/client options, examples, diagnostics, troubleshooting notes and an Android appendix. source
Download formats
SourceForge provides source archives, Windows executables, Android APKs and SHA-256 checksums for the 2.2.2 release. source
Homebrew packaging
Homebrew distributes iperf 2.2.1 with BSD-3-Clause metadata and binary bottles for macOS Intel, Apple Silicon and Linux ARM64 or x86_64. source
Installation
Source builds use GNU Autotools with configure, make and make install; packaged builds are commonly named iperf. source
Integration limits
iPerf2 and iPerf3 are independent implementations and do not interoperate. source
Interoperability limit
Iperf 2 and iperf3 are separate implementations and cannot interoperate during tests. source
Jitter and loss
UDP tests report jitter and total or lost packets, with enhanced reporting options. source
L4S and ECN
The tool supports UDP L4S testing, ECN marking statistics and near-congestion measurements. source
Latency metrics
It reports round-trip time, one-way delay, packet latency and latency histograms. source
Licence
The core iperf2 source is distributed under the BSD 3-Clause licence, with some ancillary files using other open-source licences. source
Limit: Android usability
Google Play reviewers complain about a weak interface, difficult command entry and failures when changing options without restarting. source
Limit: command line
Softpedia says the lack of a standard graphical interface makes the program more suitable for experienced users. source
Limit: iOS interface
Apple App Store reviews describe a cryptic interface aimed at experienced users and request easier parameter entry. source
Limit: paid app workflow
Reviews of the Banana Studio app complain that users must type options manually and ask for a command builder or saved presets. source
Limit: two-endpoint setup
Softpedia notes that testing requires both a client and a server, adding setup work. source
Maker identity
The SourceForge project is maintained under the rjmcmahon account and was registered on February 6, 2014. source
Measurements
Supported measurements include one-way delay, round-trip time, jitter, packet loss, and throughput. source
Multicast
It supports multicast and source-specific multicast traffic over IPv4 and IPv6. source
Network support
It supports multicast, including source-specific multicast joins, and IPv4 and IPv6. source
Notable limitation
The manual says its metrics are measured at socket-level reads and writes and do not include lower-level protocol-header overhead. source

Checked against the maker's pages on 14 Oct 2026.