MooseFS
moosefs.com
- Free plan
- Windows
- macOS
- Linux
- Web
- API
- Self-hosted
What MooseFS is
MooseFS is distributed storage software that combines data held across multiple servers into one resource. It can be mounted as a POSIX filesystem, used as a block device or accessed through the C API. Reads and writes run in parallel across chunkservers, and adding chunkservers increases capacity and bandwidth. The system replicates chunks and automatically recreates missing copies after disk or node loss. Community is free forever under GPLv2 and provides a single active master with single-parity erasure coding. Personal is for non-commercial use, free for up to 20 TiB of used raw space, and includes the full Pro feature set; additional usage is priced at €9, paid once for each TiB beyond that limit. Pro includes synchronized master failover and clusters across locations. MooseFS 5 adds cluster-wide authentication. Official binary packages are offered for Linux distributions, FreeBSD, Raspberry Pi OS and macOS; macOS requires macFUSE and targets macOS 12 or later. The native Windows client is included with Pro. Enterprise pricing is tailored to deployment and requires a quote.
Who it suits
Community is described as suitable for development, evaluation and smaller deployments; Personal is intended for individual developers, researchers and home labs. Enterprise is an option for commercial use, with tailored pricing by quote.
Good to know, and what to watch
- Replicates chunks and rebuilds copies after disk or node loss.
- Parallel I/O can scale with added chunkservers.
- Community is free forever under GPLv2.
- Pro includes synchronized master failover.
- Personal includes the full Pro feature set.
- Community has a single active master.
- Personal is limited to non-commercial use.
- The Windows client is included with Pro.
- Enterprise pricing requires a quote.
Plans
Every plan and priceEnterprise
Community
Personal
Free plan
Getting started
- Visit https://moosefs.com/
- Choose Community, Personal, or Enterprise based on deployment and use
- Install an official package on Linux, FreeBSD, Raspberry Pi OS, or macOS
- Use macFUSE for macOS packages targeting macOS 12 or later
- Deploy chunkservers and access the storage through POSIX, block-device, or C API interfaces
Limits to check
Community provides one active master and single-parity erasure coding. Personal is free for up to 20 TiB of used raw space for non-commercial use; additional usage is billed at €9 per TiB beyond that threshold.
The Club's review
MooseFS is on-premises distributed storage that combines multiple servers into one logical resource. It suits teams building their own storage infrastructure, from home labs and development environments to commercial clusters. Its strongest case is scale-out capacity with replication and several access methods; commercial buyers should weigh the Pro-only failover, Windows client and support against the cost and operational responsibility of self-hosting.
Overview
Developed and maintained by Saglabs SA in Warsaw, Poland, MooseFS has been available since 2005. Data is spread across chunkservers, while applications see a unified storage system rather than a collection of individual machines. That architecture is useful when capacity and bandwidth need to grow by adding servers instead of replacing a single array.
MooseFS is deployed on premises and supports Kubernetes. It belongs in the Distributed File System Software and Software-Defined Storage Software categories.
Key features
- Flexible access: Applications can mount MooseFS as a POSIX filesystem, use it as a block device, or connect through the C API. That makes it practical for both conventional file workloads and software that needs block or programmatic access.
- Replication and recovery: Chunks are replicated across different chunkservers. If a disk or node fails, MooseFS automatically recreates missing copies, reducing the manual work required to restore redundancy.
- Parallel I/O: Reads and writes run in parallel across multiple chunkservers. Adding chunkservers increases capacity and bandwidth, so expansion can improve throughput as well as usable space.
- Pro failover: Pro synchronizes master servers and lets a follower take over automatically when the leader fails. This is the key availability upgrade for deployments where a single active master is unacceptable.
- Multi-location policies: Pro supports clusters across locations and offers per-location storage policies intended to keep data near its users. That is relevant to geographically distributed installations, not just a single-site lab.
- Cluster authentication: MooseFS 5 gates data access through the master and prevents bypassing export permissions at the storage layer, providing a clearer security boundary for shared clusters.
- Erasure coding: The Community plan includes single-parity erasure coding, alongside replication support.
Pricing
Community
Community costs free, billed free forever. It is GPLv2 open source and provides a single active master with single-parity erasure coding. Saglabs positions it for development, evaluation and smaller deployments. The single-master design does not provide Pro's automatic master failover.
Personal
Personal costs €9, paid once, billed at 9 € per TiB beyond 20 TiB of used raw space. It is non-commercial, free up to 20 TiB of used raw space, and includes the full Pro feature set. Individual developers, researchers and home-lab operators get advanced capabilities without a recurring license, but the non-commercial restriction rules it out for business production use.
Enterprise
Enterprise uses custom pricing tailored to the deployment. It is for commercial use and includes 24/7 developer support and dedicated releases. Buyers should request a quote; quote enquiries usually receive a written email reply within one or two working days.
Platforms
MooseFS is offered for API, Linux, macOS, self-hosted, web and Windows environments. Official binary packages cover Linux distributions, FreeBSD, Raspberry Pi OS and macOS; macOS packages require macFUSE and target macOS 12 or later. The native Windows client is included with Pro, so Windows users need that tier rather than Community. Community support is discussion and documentation driven, while commercial Pro includes round-the-clock developer support.
Who it's for
Choose MooseFS for a self-managed cluster where scale-out storage, replication and parallel I/O matter. Community fits evaluation and smaller non-commercial installations; Personal fits individual developers, researchers and home labs that stay within its non-commercial terms and 20 TiB allowance. Enterprise is the appropriate route for commercial deployments needing failover, multi-location policies, dedicated releases and direct support.
Pros and cons
Pros
- Replication automatically rebuilds copies after disk or node loss.
- Adding chunkservers expands both capacity and bandwidth.
- POSIX, block-device and C API access covers varied application designs.
- Pro adds automatic master failover and location-aware storage policies.
- A free forever GPLv2 Community edition and a 20 TiB non-commercial Personal allowance lower the entry cost.
Cons
- Community has only one active master, limiting built-in master redundancy.
- Personal cannot be used commercially, despite including Pro features.
- The Windows client is restricted to Pro.
- macOS deployment requires macFUSE and macOS 12 or newer.
- Self-hosting leaves infrastructure operation to the buyer, while Community support has no developer-backed 24/7 service.
Alternatives
SeaweedFS is worth choosing when you want a freemium self-hosted option across API, Linux, macOS and Windows, with a community tier for any cluster size.
JuiceFS is an alternative for teams comparing a self-hosted Community Edition with a separate cloud service.
BeeGFS suits readers seeking a free community edition for API, Linux and self-hosted deployments.
Tahoe-LAFS is a free, open-source self-hosted storage grid with no hosted or paid tier stated.
Hadoop Distributed File System is a no-charge Apache-licensed option for self-hosted clusters.
OrangeFS offers open-source software with optional commercial and research services.
LizardFS is a paid alternative with free access and support packages ranging from weekday coverage to enterprise technical support.
LucidLink is the better fit when you need a hosted, paid service with desktop, mobile and web access rather than an on-premises cluster.
Verdict
MooseFS is a strong choice for technically capable users who want self-hosted storage that scales by adding servers, protects data through replication and supports multiple protocols. Pick Community for evaluation and small non-commercial clusters, Personal for eligible individual use, and Enterprise when commercial failover, multi-location operation and developer support are requirements. Look elsewhere if you need a hosted service, a commercial license without an enterprise process, or Windows access without Pro.
The verdict
MooseFS provides distributed storage with replication and multiple access methods, while Pro adds failover and multi-location features. The right plan depends on commercial-use needs, storage volume and platform requirements.
Questions people ask
Is MooseFS free?
The Community plan costs nothing and is free forever under GPLv2. Personal is free up to 20 TiB of used raw space for non-commercial use.
What does Personal cost after 20 TiB?
Personal is billed at €9 per TiB beyond 20 TiB of used raw space, billed once.
Which operating systems are supported?
Official binary packages are offered for Linux distributions, FreeBSD, Raspberry Pi OS, and macOS. The native Windows client is included with Pro.
Does MooseFS replicate data?
Yes. Chunks are replicated across chunkservers and missing copies are recreated after disk or node loss.
What support does Enterprise include?
Enterprise includes 24/7 support and dedicated releases. Pricing is tailored to the deployment and provided by quote.
What the maker publishes
- Access
- The system can be mounted as a POSIX filesystem, used as a block device, or accessed through the C API. source
- Company
- MooseFS is developed and maintained by Saglabs SA, an engineering company headquartered in Warsaw, Poland. source
- Fault tolerance
- MooseFS replicates chunks across different chunkservers and automatically recreates missing copies after disk or node loss. source
- Founded
- 2005 source
- Headquarters
- Warsaw, Poland source
- Multi-location
- Pro supports clusters spanning locations, with per-location storage policies intended to keep data near where it is used. source
- Parallel I/O
- Reads and writes run in parallel against multiple chunkservers, and adding chunkservers adds capacity and bandwidth. source
- Product
- MooseFS is distributed storage software that spreads data across multiple servers while presenting it as one resource. source
- Pro failover
- Pro runs synchronized master servers so a follower can take over automatically if the leader fails. source
- Quote response
- The company says quote enquiries usually receive a written email reply within one or two working days. source
- Security
- MooseFS 5 adds cluster-wide authentication that gates data access through the master and prevents storage-layer bypass of export permissions. source
- Support
- Commercial Pro includes 24/7 support from the developers, while Community support is community-driven discussion and documentation. source
- Supported systems
- Official binary packages are offered for Linux distributions, FreeBSD, Raspberry Pi OS, and macOS; macOS packages require macFUSE and target macOS 12 or later. source
- Target users
- The maker describes Community as suitable for development, evaluation, and smaller deployments, and Personal as intended for individual developers, researchers, and home-lab use. source
- Windows client
- The native Windows client is included with Pro. source
Checked against the maker's pages on 30 Sept 2026.