MoreClockTool
igorslab.de
- Free plan
- Windows
What MoreClockTool is
MoreClockTool (MCT) is a free Windows utility for simpler overclocking of newer AMD graphics cards, designed to complement MorePowerTool and Red BIOS Editor. The maker lists support for RDNA 2 and RDNA 3, with RDNA 4 compatibility added in an April 2025 update. Users can enter minimum and maximum clock frequencies in MHz, limit voltage increases, and adjust GPU power by percentage. Multiple settings profiles can be saved and loaded, including profiles made in Wattman. The Set control applies changes to the system in real time; Reset restores factory defaults. MCT also includes a Memory Fast Timing Level setting and fan controls analogous to Wattman, though further memory and fan settings are directed to MorePowerTool. The listed release is MCT 1.1.11 Version 2, dated 12.04.2025, with ADLX 1.4 support, RDNA4 bug fixes, and an ImageSharpening Sharpen Desktop feature. The maker describes use as experimental and at the user's own risk: higher voltages may damage hardware, and the tool is not intended for all-settings production use around the clock. It is intended only for experienced users evaluating settings.
Who it suits
MCT is aimed at experienced users evaluating overclocking settings on supported newer AMD graphics cards. It is not intended as an around-the-clock production setup with all settings enabled.
Good to know, and what to watch
- Supports RDNA 2, RDNA 3, and RDNA 4 cards.
- Allows numeric minimum and maximum clock settings.
- Can save and load multiple profiles.
- Set applies changes in real time; Reset restores defaults.
- Use is experimental and at the user's own risk.
- Higher voltage settings may damage hardware.
- Further memory and fan settings require MorePowerTool.
Plans
Every plan and priceMoreClockTool (MCT)
Free plan
Getting started
- Open the maker's download page
- Download MCT from the maker's site
- Run it on Windows with a supported AMD graphics card
- Enter minimum and maximum frequencies or adjust voltage and power controls
- Save a tuning profile or load one created in Wattman
- Use Set to apply changes or Reset to restore factory defaults
Limits to check
The plan is free and intended for newer AMD graphics cards, experienced users, and evaluation purposes. The maker says use is experimental, higher voltages may damage hardware, and the software is not intended for all-settings production use around the clock.
The verdict
MCT provides direct controls and profile handling for experienced AMD GPU users. Treat its settings as experimental, and obtain the software from the maker's site as advised.
Questions people ask
How much does MoreClockTool cost?
MoreClockTool is free. The listed plan is free.
Which graphics cards are supported?
The maker lists newer AMD cards using RDNA 2 and RDNA 3, with RDNA 4 compatibility added in the April 2025 update.
What operating system does it support?
Windows is the listed operating system.
Can it save overclocking settings?
Yes. MCT saves and loads multiple profiles and can load profiles created in Wattman.
Is MoreClockTool safe for production use?
The maker describes use as experimental and at the user's own risk. Higher voltages may damage hardware, and the software is not intended for all-settings production use around the clock.
What the maker publishes
- Apply and reset
- Set applies changes to the system in real time, while Reset restores factory defaults. source
- Clock controls
- Users can enter minimum and maximum frequencies numerically in MHz. source
- Distribution
- The maker says the software is available free of charge from its site and warns that other sources may host unauthorized or older versions or malware. source
- Intended users
- The maker says the tool should be used only by experienced users for evaluation purposes. source
- Latest listed release
- The download page lists MCT 1.1.11 Version 2, dated 12.04.2025, with ADLX 1.4 support, RDNA4 bug fixes, and an ImageSharpening Sharpen Desktop feature. source
- Memory timing and fan
- MCT includes a Memory Fast Timing Level setting and fan controls analogous to Wattman; the maker directs users to MorePowerTool for further memory and fan settings. source
- Profiles
- Users can save and load multiple settings profiles and load profiles created in Wattman. source
- Purpose
- MCT is a lightweight tool intended to complement MorePowerTool and Red BIOS Editor and replace AMD Wattman for simpler overclocking. source
- Safety and liability
- The maker describes use as experimental and at the user's own risk, says higher voltages may damage hardware, and says the software is not intended for 24/7 use with all settings in production systems. source
- Support
- The maker directs feedback and discussion to the igor’sLAB community forum and asks users not to contact the editorial team directly about functionality or use. source
- Supported graphics cards
- The maker says MCT is for newer AMD graphics cards and lists support for RDNA 2 and RDNA 3; its April 2025 update adds RDNA 4 compatibility. source
- Voltage and power
- The tool can limit voltage upward and adjust GPU power by a percentage, with some ranges configurable through MorePowerTool. source
Checked against the maker's pages on 3 Oct 2026.