OpenGazer
github.com
- Free plan
- Linux
- Self-hosted
What OpenGazer is
OpenGazer is a Linux desktop application that uses a webcam to estimate gaze direction and pass coordinates to other programs. It also tracks head position and rotation, and displays the estimated gaze point, head-rotation lines, and a calibration target. Setup involves calibrating against indicated screen points while keeping the head still, then selecting facial tracking points; at least four are needed, with seven or eight recommended. The project specifies a 640×480 camera placed centrally below the monitor. Gaze estimates are written to standard output and sent through a local UDP socket on port 20230. Dasher is one example of software that can use gaze direction for eye-based writing; changing calibration to two points can make OpenGazer act as a binary switch. It is free and distributed under GPLv2, with an X Window System interface. The project is marked Alpha, and its listed last update is 2013-04-24. Building it requires VXL, OpenCV, gtkmm, cairomm, and Boost.
Who it suits
OpenGazer may suit Linux users exploring webcam-based gaze input or connecting gaze coordinates to another program. Building it requires the listed development libraries and tools.
Good to know, and what to watch
- Uses an ordinary webcam for gaze estimates.
- Sends coordinates to standard output and a local UDP socket.
- Can be configured as a binary switch.
- Free under GPLv2.
- Project status is listed as Alpha.
- Last listed update is 2013-04-24.
- Building requires VXL, OpenCV, gtkmm, cairomm, and Boost.
Plans
Every plan and priceOpenGazer
Free plan
Getting started
- Open the project repository on GitHub
- Prepare a Linux system with VXL, OpenCV, gtkmm, cairomm and Boost
- Connect a webcam and set it to 640×480
- Place the camera centrally below the monitor
- Calibrate by looking at the indicated screen points while keeping your head still
- Select at least four facial tracking points, with seven or eight recommended
Limits to check
The free plan requires a webcam, Linux and the listed build dependencies. The project is labelled Alpha, and the listed last update is 2013-04-24.
The verdict
OpenGazer offers webcam gaze tracking and coordinate output for Linux, with a documented calibration process. Its Alpha status, old listed update, and build dependencies are important considerations.
Questions people ask
How much does OpenGazer cost?
OpenGazer is free, with a free plan priced at no cost. There is no free trial because the software is already free.
Which platforms does it support?
It supports Linux and self-hosted use, including Debian and Ubuntu.
What does it output?
Gaze coordinates are written to standard output and sent over a local UDP socket on port 20230. The estimated gaze point is also displayed on screen.
Is OpenGazer open source?
Yes. It is distributed under the GNU General Public License version 2.0 (GPLv2).
Can it be used for eye-based writing?
Yes. The project gives Dasher as an example of software that can use OpenGazer's gaze direction for writing with the eyes.
What the maker publishes
- Approach
- The project describes itself as a low-cost software alternative to commercial hardware-based eye trackers. source
- Audience and interface
- SourceForge describes it as a Linux desktop application with an X Window System interface for end users. source
- Build requirements
- The repository README lists VXL, OpenCV, gtkmm, cairomm, and Boost as build requirements. source
- Build requirements
- The README lists VXL, OpenCV, gtkmm, cairomm, and Boost as build requirements. source
- Calibration
- The README says users calibrate by looking at indicated screen points while keeping their head still. source
- Calibration
- Calibration asks the user to look at screen points while keeping their head still. source
- Camera setup
- The README instructs users to set the camera to 640×480 and place it centrally below the monitor. source
- Camera setup
- The instructions specify a 640×480 camera mode and access to the webcam device file. source
- Custom use
- The README says changing calibration points to two points can make OpenGazer work as a binary switch. source
- Custom use
- The README says two calibration points can configure the tracker as a binary switch. source
- Development status
- SourceForge lists the project status as Alpha and its last update as 2013-04-24. source
- Example integration
- SourceForge gives Dasher as an example program that can use gaze direction for eye based writing. source
- Gaze output
- The program estimates the gaze point and displays it on screen. source
- Head tracking
- Users select facial points to track head position and rotation alongside gaze. source
- License
- OpenGazer is distributed under the GNU General Public License version 2.0 (GPLv2). source
- License
- The repository lists the GNU GPL version 2.0 license. source
- Output
- The README says gaze estimates are printed to standard output and sent over a local UDP socket on port 20230. source
- Output methods
- Gaze coordinates are written to standard output and sent over a local UDP socket on port 20230. source
- Platform
- SourceForge lists Linux as the operating system and X Window System (X11) as the user interface. source
- Project status
- SourceForge labels the project Alpha and lists its last update as 2013-04-24. source
- Purpose
- OpenGazer uses an ordinary webcam to track gaze direction and pass it to other programs. source
- Purpose
- OpenGazer is an open-source gaze tracker designed for ordinary webcams. source
- Tracking setup
- The README instructs users to select at least four facial tracking points and recommends seven or eight. source
- Use case
- The project gives Dasher as an example of software that can use OpenGazer so a person can write with their eyes. source
Checked against the maker's pages on 4 Oct 2026.