Quickcode
quickcode.ai
- Free plan
- Web
What Quickcode is
Quickcode is a cloud-based trade tool for tariff classification, sanctions screening, landed-cost calculation, and trade document generation. It runs on the web and has a freemium model, with an Always Free plan that allows 10 classifications per month. The Broker Partner Program costs $749 a month and includes 500 classifications and unlimited seats. The Importers & Manufacturers plan costs $3,000 a month and covers up to 25,000 total monitored products. A 7-day trial is listed. The plans set different limits, so the relevant measure is either monthly classifications or the number of monitored products. Quickcode is based at 1390 Chain Bridge Road, Suite 200, McLean, VA 22101, United States.
Who it suits
Quickcode may suit brokers and importers or manufacturers looking for classification, sanctions screening, cost calculations, or trade document generation in a web-based service.
Good to know, and what to watch
- Free plan includes 10 classifications per month.
- Broker plan includes 500 classifications and unlimited seats.
- Importers & Manufacturers plan covers up to 25,000 monitored products.
- Includes screening, landed-cost calculation, and document generation.
- Free plan is limited to 10 classifications per month.
- Broker Partner Program costs $749 a month.
- Importers & Manufacturers plan costs $3,000 a month.
Plans
Every plan and priceAlways Free
Broker Partner Program
Importers & Manufacturers
Free plan · 7-day trial
Getting started
- Visit quickcode.ai
- Open the service in a web browser
- Choose the Always Free plan or a listed paid plan
- Use the 7-day trial if it fits your evaluation
- Start classification, screening, cost, or document workflows
Limits to check
The Always Free plan is limited to 10 classifications per month. Broker Partner Program includes 500 classifications, while Importers & Manufacturers covers up to 25,000 total monitored products.
The Club's review
Quickcode is a cloud trade-management service that combines classification, sanctions screening, landed-cost work and document generation in a web application. It is most relevant to customs brokers and to importers or manufacturers managing recurring product work. The free allowance is useful for occasional classification; larger teams need to match a paid plan’s quota or monitoring ceiling to their operation.
Overview
Quickcode brings several customs and trade tasks into one service rather than limiting itself to tariff lookup. Its scope covers tariff classification, sanctions screening, landed-cost calculation and trade-document generation, with product monitoring aimed at importers and manufacturers. That combination can reduce the need to split related work across separate tools, while the plan structure makes workload capacity the central buying decision.
Key features
Classification and screening
Tariff classification is available on the Always Free plan, but the allowance is only 10 classifications per month. That is enough for light or occasional use, not a broker handling a continuous flow of entries. The Broker Partner Program raises the allowance to 500 classifications monthly, a more practical fit for a defined broker workload at $749 per month.
Sanctions screening sits alongside classification in Quickcode’s trade-focused feature set. Teams that want both checks in one cloud service may find that breadth useful. The published plan descriptions do not tie screening to a particular tier, so it should be confirmed as part of a purchasing discussion rather than assumed from the headline price.
Landed cost and documents
Landed-cost calculation and trade-document generation extend Quickcode beyond classification and screening. Keeping those activities together can help an organization seeking one web workspace for connected trade tasks. The plans do not break out feature availability by tier, so capacity and commercial fit matter more than choosing a tier for a named individual function.
Product monitoring
The Importers & Manufacturers plan allows up to 25,000 total monitored products. That ceiling is aimed at organizations with a substantial catalogue, rather than small teams that only classify a handful of items each month.
Pricing
Quickcode has a freemium model, with a 7-day trial and paid plans starting at $749 per month. The Always Free plan costs nothing and includes 10 classifications per month. It is a sensible starting point for occasional classification, but the hard monthly cap makes it unsuitable for regular brokerage throughput.
The Broker Partner Program costs $749 a month, billed monthly, and includes 500 classifications and unlimited seats. That combination suits a broker needing a larger monthly allowance without a seat ceiling. Its price is difficult to justify for a low-volume user, and the 500-classification quota still sets a clear limit for busier operations.
Importers & Manufacturers costs $3,000 a month, billed monthly, and supports up to 25,000 total monitored products. It is the plan for a broad catalogue and ongoing monitoring, not a modest importer seeking a low-cost step up from the free tier. No published seat limit is attached to this plan, while the Broker Partner Program explicitly offers unlimited seats.
Platforms
Quickcode is delivered as a cloud service on the web. That deployment suits distributed trade teams that want browser access rather than a locally installed application.
Who it's for
Customs brokers with up to 500 classifications a month are the clearest fit for the Broker Partner Program, especially when multiple staff need access. Importers and manufacturers with up to 25,000 monitored products should consider the higher-priced plan when catalogue scale is the priority. Small businesses, occasional shippers and users evaluating the workflow can begin with the 10-classification free plan, but should expect to outgrow it quickly if classification is routine.
Pros and cons
Pros
- Broad trade coverage: Classification, sanctions screening, landed-cost calculation and document generation are gathered in one cloud service.
- Genuine free entry point: Ten classifications per month allow limited users to start without a subscription.
- Broker-friendly access: The $749 monthly Broker Partner Program includes unlimited seats and 500 classifications.
- Large monitoring ceiling: The $3,000 monthly Importers & Manufacturers plan supports up to 25,000 monitored products.
Cons
- Steep paid starting price: The first paid tier is $749 a month, well beyond the needs of occasional users.
- Free quota is tight: Ten classifications monthly will not support a steady operational queue.
- High enterprise commitment: Importers and manufacturers pay $3,000 a month for the large monitoring allowance.
- Tier boundaries are unclear: Plan descriptions do not specify which tiers include each of the screening, landed-cost and document functions.
Alternatives
CustomsLogIQ is a better starting point when you want API and web access, single-item manual classification and a free signup with three monthly credits, followed by $1 per credit.
Choose XEMI instead when your organization needs a customized commercial arrangement and is prepared to contact sales for pricing based on business needs.
GetRegNex suits readers seeking free access described as full Pro access under early pricing.
Enthron AI is the lower-cost option when API access matters: its Flex plan is £5 a month for 50–2,500 classifications monthly, with tariff and duty lookup, sanctions screening, export-control beta access and developer API access.
LandedCost is worth considering for client-based work, with Agency & Enterprise pricing from $49 per client per month, custom seats, multi-client workspaces and dedicated support.
Pick TariffPilot when an annual-contract model and proposal-focused plans better match your process.
TariffWise is the simpler low-volume paid alternative, with a $59 monthly Starter plan for 100 classifications, duty and landed-cost estimates, saved history with audit rationale and one seat.
3rdwave Global Trade Management is an alternative for U.S. importers processing up to 2,500 customs entries per year.
For a wider shortlist, browse Trade Management Software.
Verdict
Choose Quickcode when you want classification, screening, landed-cost calculations and trade documents in one web service, and your workload fits either 500 monthly classifications or a 25,000-product monitoring ceiling. Look elsewhere if you need a low-cost paid tier, a larger classification quota, or clearly defined feature entitlements by plan; the free 10-classification allowance is the only option aimed at very light use.
The verdict
Quickcode brings classification, screening, landed-cost calculations, and trade document generation together in a cloud service. Compare the plan limits with your classification volume or monitored-product needs before choosing an option.
Questions people ask
Is there a free Quickcode plan?
Yes. Always Free costs nothing and includes 10 classifications per month.
How much does the Broker Partner Program cost?
It costs $749 a month, billed monthly, with 500 classifications and unlimited seats.
What does the Importers & Manufacturers plan cost?
It costs $3,000 a month, billed monthly, and covers up to 25,000 total monitored products.
Does Quickcode offer a trial?
Yes. Quickcode lists a 7-day trial.
Which platforms support Quickcode?
Quickcode is available on the web as a cloud deployment.
What trade functions are included?
The listed functions are tariff classification, sanctions screening, landed-cost calculation, and trade document generation.
What the maker publishes
- Headquarters
- 1390 Chain Bridge Road, Suite 200, McLean, VA 22101, United States source
Checked against the maker's pages on 4 Oct 2026.