SuperSlicer

7.2easy start · #11 of 27
in 3D Slicer Software

Free to practise onyes
Free trialnot on record
Well documentedyes
Runs where you workyes

Runs on Linux, Mac, Windows.

SuperSlicer is ranked #11 of 27 in 3D slicer software on The Geeks Club. It runs on Linux, macOS, Windows. There is a free plan.

SuperSlicer plans and pricing

All plans

SuperSlicer Free G-code generation for FFF printers · PNG layers for mSLA printers github.com · 30 Sept 2026

Compared on 3D slicer software

Free plan: Yes
Support generation: both
Resin slicing: Yes
Multi-material printing: Yes
Variable layer height: Yes
Supported platforms: Windows, macOS, Linux
Input file formats: STL, OBJ, AMF, 3MF
Output file formats: G-code, PNG

Best SuperSlicer alternatives

See all 20

GrabCAD Print 0 of 4 in the starter kit Lesson 17.9 Lychee Slicer 0 of 4 in the starter kit Lesson 27.7 3D Sprint 0 of 4 in the starter kit Lesson 37.6 Orca-Flashforge 0 of 4 in the starter kit Lesson 47.4 Eiger 0 of 4 in the starter kit Lesson 57.3 KISSlicer 0 of 4 in the starter kit Lesson 67.3

The record

Purpose: SuperSlicer converts 3D models in STL, OBJ, or AMF formats into G-code for FFF printers or PNG layers for mSLA printers.
Printer compatibility: The project says it is compatible with modern printers using the RepRap toolchain and firmware based on Marlin, Prusa, Klipper, and others.
Lineage: SuperSlicer is a personal fork of PrusaSlicer, itself based on Slic3r.
Calibration: It includes generated calibration tests and built-in calibration prints.
Print tuning: The project lists controls for top surface quality, infill density, thin walls, hole dimensions, overhangs, brims, and seams.
Printing features: It supports multiple extruders, multiple objects with distinct print settings, multiple layer heights, and a range of infill patterns.
CLI: The software provides a command-line interface for use without its graphical interface.
Post-processing: It supports customizable G-code macros and post-processing scripts.
Downloads: The project lists prebuilt 64-bit Windows, Linux, and macOS releases, plus nightly builds through GitHub Actions.
Build caveat: The README says the Linux and macOS builds have not been tested by the maintainer, only compiled.
Windows distribution: The README says Windows users can obtain installers through Chocolatey or Scoop.
License: SuperSlicer is licensed under the GNU Affero General Public License version 3.
Support: The README directs users to report bugs and suggests discussing proposed patches through a GitHub issue or comment.
Project status: The releases page lists version 2.7.63.0 beta 2 as a pre-release.
Price from: Free

Where it ranks on The Geeks Club

Best 3D Slicer Software in 2026#11 of 27

Is SuperSlicer yours?

Claim it for free: prove the domain, then correct facts, plans and screenshots. An editor reviews every change.

Claim it free Promote SuperSlicer

Sources

github.com/supermerill/SuperSlicer· checked 30 Sept 2026
github.com/supermerill/SuperSlicer/releases· checked 30 Sept 2026