Skip to the content
Know your tech before you buy it. Makers: get listed from $49/mo

Termshark

termshark.io

  • Free plan
  • Windows
  • macOS
  • Linux
  • Android
8.0 Club score Visit termshark.io

What Termshark is

Termshark is a terminal interface for tshark, inspired by Wireshark, for examining saved packet captures and live network traffic. It reads pcap files and can sniff live interfaces when tshark permits. Wireshark display filters work on both saved captures and live traffic, and users can reassemble and inspect TCP and UDP flows. The conversation view supports Ethernet, IPv4, IPv6, UDP, and TCP. Other listed features include packet search, copying packet ranges, and profiles for colors and columns. Termshark is intended for people debugging on remote machines who want to inspect a large capture without transferring it to a desktop. Downloads are listed for Linux, macOS, BSD variants, Android through Termux, and Windows. Precompiled executables are available from GitHub releases. The software is free and MIT licensed, but packet analysis requires tshark 1.10.2 or newer in the PATH. The project also notes that tshark has capabilities Termshark does not currently expose.

Who it suits

Termshark suits people debugging on remote machines who need to inspect pcap files or live traffic in a terminal. It can also suit users who want Wireshark display filters and TCP or UDP flow inspection.

Good to know, and what to watch

  • Reads pcap files and can sniff live interfaces.
  • Applies Wireshark display filters to captures and live traffic.
  • Reassembles and inspects TCP and UDP flows.
  • Supports Linux, macOS, BSD, Android through Termux, and Windows.
  • Requires tshark 1.10.2 or newer in the PATH.
  • Some tshark features are not exposed.
  • Live sniffing depends on tshark permissions.

Termshark

Free

Free plan

Getting started

  1. Open the Termshark website or GitHub releases
  2. Install a precompiled executable for Linux, macOS, BSD, Android through Termux, or Windows
  3. Install tshark version 1.10.2 or newer
  4. Ensure tshark is available in the system PATH
  5. Open a pcap file or begin sniffing a permitted live interface
  6. Apply Wireshark display filters to inspect packets and flows

Limits to check

Packet analysis requires tshark 1.10.2 or newer in the PATH. Termshark currently exposes fewer features than tshark, and loaded packet data uses approximately 10 MB of RAM per 1,000 packets.

The Club's review

Overview

Termshark is a terminal interface for inspecting packet captures through tshark, built for people who need to debug traffic on the machine where it was captured. It is a practical choice for remote pcap work and live troubleshooting, but less suitable when you need the full range of tshark’s capabilities.

Key features

Termshark reads pcap files and can sniff live interfaces when tshark has permission. That makes it useful both for reviewing saved traces and for investigating traffic in place, without first moving a large capture to a desktop.

Wireshark display filters work with offline pcaps and live captures, so users can narrow traffic using a familiar filter syntax. Termshark can also reassemble and inspect TCP and UDP flows. Its conversation view supports Ethernet, IPv4, IPv6, UDP, and TCP; this is useful for common network troubleshooting, though the supported set is specific.

Packet search, introduced in version 2.4, helps locate relevant traffic, while packet ranges can be copied from the terminal. Profiles save color and column settings, and the interface supports 16-color, 256-color, and truecolor terminal modes. These features make the terminal view more adaptable, but do not change the central constraint: tshark offers features Termshark does not expose.

Termshark needs tshark 1.10.2 or newer in the PATH for packet analysis. Loaded packet data uses approximately 10 MB of RAM per 1,000 packets, a consideration when working with large captures on a constrained machine.

Pricing

Termshark: free. The free plan includes live capture, offline trace analysis, display filters, pcap files, and command-line capture. It suits individual users who need terminal-based packet inspection without a license fee. Its costs are practical rather than monetary: tshark must be installed and reachable in the PATH, live capture requires permission, and some tshark features are not exposed.

Platforms

Downloads are available for Linux, macOS, BSD variants, Android through Termux, and Windows, including precompiled executables through GitHub releases. Actual packet analysis still depends on tshark being available in the PATH. The project directs users to GitHub for setup help, bug reports, and feature requests.

Who it's for

Termshark is best for administrators and other technical users debugging on remote machines, especially when a pcap is large or inconvenient to transfer. It also fits people who prefer a terminal workflow for filtering and examining captures. Beginners who want a graphical interface, or analysts who depend on features only exposed by tshark, should look elsewhere.

Pros and cons

Pros

  • Works with saved pcaps and permitted live captures, covering two common packet-analysis workflows.
  • Wireshark display filters and TCP/UDP flow inspection support focused analysis from the terminal.
  • Runs across desktop systems, BSD variants, and Android through Termux, with free use under an MIT license.

Cons

  • Requires tshark 1.10.2 or newer in the PATH, adding a dependency users must install and maintain.
  • Does not expose all tshark features, limiting its fit for users who need the underlying tool’s full capabilities.
  • Live capture depends on tshark permissions, and loaded packet data uses memory as captures grow.

Alternatives

For a broader directory of capture tools, browse Network Packet Capture Software.

Pick Wireshark if you want its full version without a license fee on Linux, macOS, or Windows. tcpdump is another free option on those platforms; capture permission depends on the operating system and configuration.

Sniffnet is a free, open-source option for Linux, macOS, and Windows. For Android specifically, PCAPdroid offers core network monitoring and capture free, with paid features excluded from that plan.

Consider Colasoft Capsa if a Windows freemium tool fits better: its free plan monitors 10 IP addresses and has a four-hour session timeout, with no WiFi connection monitoring. NetworkMiner offers a free edition and GPLv2 open-source code written in managed C# on .NET Framework.

Malcolm is free, Apache License 2.0, and self-hosted. Arkime is also free and self-hosted, with no paid-only features or license fees.

Verdict

Choose Termshark if you need free terminal-based packet inspection on a remote host, particularly for filtering and reviewing large pcaps where they reside. Its main advantage is that focused workflow; its main drawback is reliance on tshark and access to only part of tshark’s feature set. If either constraint blocks your work, choose a different packet-analysis tool.

The verdict

Termshark offers packet inspection and filtering through a terminal interface, including for remote-machine workflows. It depends on tshark, and does not expose all of tshark’s features.

Questions people ask

Is Termshark free?

Yes. Termshark is free and the project identifies it as MIT licensed.

Which platforms are supported?

Downloads are listed for Linux, macOS, BSD variants, Android through Termux, and Windows.

What does Termshark require?

It depends on tshark, tcell, and gowid. tshark version 1.10.2 or newer must be available in the PATH for packet analysis.

Can it inspect live traffic?

Yes. It can sniff live interfaces when tshark is permitted, as well as read pcap files.

Does it support Wireshark filters?

Yes. Wireshark display filters can be used with pcap files and live captures.

Can it analyze conversations and flows?

It can reassemble and inspect TCP and UDP flows. Conversation views support Ethernet, IPv4, IPv6, UDP, and TCP.

What the maker publishes

Capture and files
Termshark can read pcap files and sniff live interfaces when tshark is permitted. source
Conversations
Its conversation view currently supports Ethernet, IPv4, IPv6, UDP, and TCP. source
Conversations
It displays network conversations by protocol. source
Dependencies
Termshark depends on tshark, tcell and gowid, and tshark must be available in PATH. source
Downloads
Precompiled executables are available through the project's GitHub releases. source
Filtering
It supports Wireshark display filters for pcap files and live captures. source
Filters
It filters pcaps and live captures using Wireshark display filters. source
License
The GitHub repository identifies the project as MIT licensed. source
License
The GitHub repository identifies the project as MIT licensed. source
Limit
The project notes that tshark has more features than Termshark currently exposes. source
Packet copying
It can copy ranges of packets to the clipboard from the terminal. source
Packet files
It reads pcap files and can sniff live interfaces. source
Packet search
The project homepage lists packet search among the features introduced in version 2.4. source
Platform support
The project lists downloads for Linux, macOS, BSD variants, Android through Termux, and Windows. source
Profiles
The homepage says version 2.4 includes profiles for colors and columns. source
Purpose
Termshark is a terminal user interface for tshark, inspired by Wireshark. source
Resource use
The user guide says loaded packet data uses approximately 10 MB of RAM per 1,000 packets. source
Runtime dependency
Termshark requires tshark version 1.10.2 or higher in the PATH for packet analysis. source
Search and profiles
Version 2.4 added packet search and profiles for colors and columns. source
Stream analysis
It can reassemble and inspect TCP and UDP flows. source
Stream analysis
It reassembles and inspects TCP and UDP flows. source
Support
The homepage directs users to GitHub for setup, bugs, and feature requests. source
Target users
The project is aimed at people debugging on remote machines who need to study pcaps without copying them to a desktop. source
Terminal support
The program supports 16-color, 256-color and truecolor terminal modes. source

Checked against the maker's pages on 30 Sept 2026.