Wanos
wanos.co
- Free plan
- Linux
- Web
- Self-hosted
What Wanos is
Wanos is WAN optimization software intended to reduce network costs and accelerate network speeds. Its listed functions include TCP acceleration, cross-flow deduplication, stream compression, packet-loss recovery, and forward error correction. It also provides Layer 7 quality of service and traffic shaping; Plus adds SD-WAN path selection and a Layer 7 firewall lite feature. Organizations can install it on dedicated physical appliances or run it as a virtual machine, with formats identified for VMware/ESXi, Hyper-V, and Linux Container LXD. Listed appliance modes include bridge and tunnel, alongside network transparency. Its interface provides NetFlow exports, QoS graphs, and views of top protocols and talkers. Free Express is a perpetual release limited to version 3.2.3 and earlier, capped at two licenses per client, and excludes professional support. Plus plans begin at $970 a year for Plus 10 / 100. License rates apply to outbound WAN traffic only, not pass-through traffic. The FAQ says at least two appliances are needed for best reduction rates.
Who it suits
Wanos suits organizations looking to optimize WAN traffic and deploy on physical appliances or virtual machines. Teams considering Plus should account for outbound-traffic licensing and the stated appliance guidance.
Good to know, and what to watch
- Includes TCP acceleration and cross-flow deduplication.
- Offers Layer 7 QoS and traffic shaping.
- Supports VMware/ESXi, Hyper-V, and LXD formats.
- Interface includes NetFlow exports and QoS graphs.
- Plus plans include support.
- Free Express is limited to version 3.2.3 and earlier.
- Free Express allows up to two licenses per client.
- Free Express excludes professional support.
- Best reduction rates call for at least two appliances.
Plans
Every plan and priceFree Express
Free Express v.3.2.3
Wanos 104 hardware appliance
Central Manager 10 devices
Free plan
Getting started
- Open the Wanos website and choose the download or plan route
- Select a physical appliance or virtual-machine deployment
- Use OVA for VMware/ESXi, VHD for Hyper-V, or the LXD container release
- Choose bridge mode, tunnel mode, or network transparency
- Configure at least two WAN optimization appliances for best reduction rates
- Use Free Express or contact Wanos about a Plus trial
Limits to check
Free Express is limited to version 3.2.3 and earlier, two licenses per client, limited remote sites, and no professional support. Plus licenses apply to outbound optimized WAN traffic, with pass-through traffic excluded.
The Club's review
Overview
Wanos is WAN optimization software for organizations that need to manage traffic across WAN links. It suits teams that can deploy appliances or virtual machines at multiple sites and want optimization alongside traffic controls. Its range of optimization methods is a strength; the per-instance Plus pricing and Express limits are important constraints.
Wanos can preserve source and destination addresses without translating them or proxying traffic, which may matter in networks where those addresses must remain visible. The FAQ recommends at least two WAN optimization appliances for the best reduction rates, so it is not an obvious fit for a single-site setup.
Key features
- WAN optimization: TCP acceleration, cross-flow deduplication, stream compression, packet-loss recovery, and forward error correction address several causes of slow or inefficient WAN traffic. The breadth makes Wanos relevant to teams looking for multiple optimization techniques in one product, while plan throughput caps still shape how much traffic each instance can handle.
- Traffic management: Layer 7 quality of service and traffic shaping let teams manage application traffic. Plus adds SD-WAN path selection and a Layer 7 firewall lite feature, giving paid users a wider set of controls.
- Deployment options: Wanos runs on dedicated physical appliances or as virtual machines. Its download and guide materials identify OVA for VMware/ESXi, VHD for Hyper-V, and a Linux Container LXD release; bridge mode, tunnel mode, and network transparency are also listed. These options suit organizations with varied infrastructure, but still require a deployment across sites to pursue the best reduction rates.
- Network visibility: A graphical interface, NetFlow exports, QoS graphs, top protocols, and top talkers help administrators review traffic and QoS behavior. That reporting is useful for operations teams managing links, rather than a reason by itself to choose Wanos.
Pricing
Wanos uses a freemium model. Free Express v.3.2.3 costs nothing and includes 10 Mbps WAN optimization and 100 Mbps SD-WAN as a perpetual release. It is capped at two licenses per client, limited to version 3.2.3 and earlier, supports limited remote sites, and excludes professional support. That makes it a constrained starting point, not a like-for-like substitute for Plus.
Plus plans are billed annually, per instance, and cover outbound optimized traffic. Rates apply only to WAN outbound traffic; pass-through traffic is not counted. The tiers are:
- Plus 10 / 100: $970 a year for 10 Mbps WAN optimization and 100 Mbps SD-WAN.
- Plus 20 / 200: $1,940 a year for 20 Mbps WAN optimization and 200 Mbps SD-WAN.
- Plus 50 / 200: $2,750 a year for 50 Mbps WAN optimization and 200 Mbps SD-WAN.
- Plus 100 / 200: $3,700 a year for 100 Mbps WAN optimization and 200 Mbps SD-WAN.
- Plus 200 / 400: $4,700 a year for 200 Mbps WAN optimization and 400 Mbps SD-WAN.
Plus includes support, with phone, email, and web channels and an eight-hour response target for critical severity incidents. The per-instance structure means organizations should account for the number of deployments as well as required throughput when comparing costs.
Platforms
Wanos is listed for Linux, self-hosted, and web use, with a hybrid deployment model. Physical appliances and virtual machine options give infrastructure teams flexibility, including VMware/ESXi, Hyper-V, and LXD formats.
Who it's for
Wanos is best suited to organizations operating WAN links across multiple sites, especially those that want to combine optimization with QoS, traffic shaping, and reporting. Teams that need Plus's SD-WAN path selection and firewall lite feature should budget for a paid tier. Express may suit a small evaluation or limited deployment, but its version ceiling, two-license cap, limited remote sites, and lack of professional support make it a poor choice for buyers who need current releases or formal support.
Pros and cons
- Pros: Multiple optimization methods cover TCP, repeated data, compression, packet loss, and forward error correction.
- Pros: Physical and virtual deployment options, plus bridge and tunnel modes, accommodate different network setups.
- Pros: Plus combines Layer 7 QoS and traffic shaping with SD-WAN path selection and a Layer 7 firewall lite feature.
- Cons: The free edition is limited to an older release, two licenses per client, limited remote sites, and no professional support.
- Cons: Plus is priced per instance and scales by optimization and SD-WAN throughput, so multi-site deployments need careful capacity and cost planning.
- Cons: Wanos recommends at least two appliances for the best reduction rates, adding deployment requirements for organizations seeking that outcome.
Alternatives
Consider WAN Optimization Software to compare products in the category. Veeam Recovery Orchestrator is a separate option with free demonstration, training, and education licensing, rather than a WAN optimization comparison based on the stated plan details. Neverfail HybriStor offers a free virtual appliance with 1TB and unlimited instances, which may suit buyers prioritizing that capacity and deployment model. AppEx CloudWAN is another option for buyers seeking internet and dedicated-line connectivity with a stated 1–3 day deployment and 600+ POPs.
ExpeDat is an alternative with a paid server license offering 4 per-server capacity and unlimited bandwidth. Veeam Agent for Mac is a macOS backup product rather than a WAN optimization alternative. WANrockIT offers appliance and virtual machine options with pricing available by contacting sales. Replify WAN Optimization offers a 14-day trial without payment information, a useful way to evaluate another WAN optimization product. Resilio Active Everywhere bases pricing on devices or endpoints rather than data volume or transfer usage.
Verdict
Choose Wanos if your organization needs WAN optimization across multiple sites and wants traffic controls, visibility, and physical or virtual deployment choices in the same product. Its main advantage is the breadth of optimization methods and network controls; look elsewhere if a current, unrestricted free edition matters, if a single appliance is the intended deployment, or if per-instance annual costs do not fit your rollout.
The verdict
Wanos combines traffic optimization with QoS tools and physical or virtual deployment options. Free Express has version, license-count, and support limits; Plus starts at $970 a year.
Questions people ask
Is there a free Wanos plan?
Yes. Free Express costs nothing and is a perpetual release, with 10 Mbps WAN optimization and 100 Mbps SD-WAN.
How much does Plus cost?
Plus 10 / 100 costs $970 a year, billed annually per instance. Higher listed plans range from $1,940 to $4,700 a year.
Which platforms can run Wanos?
Wanos supports Linux, self-hosted, and web access. Virtual formats include VMware/ESXi OVA, Hyper-V VHD, and Linux Container LXD.
Does Wanos offer a trial?
Companies interested in Plus can contact Wanos for a trial.
What support comes with Plus?
Plus includes support through phone, email, and web, with an eight-hour response target for critical-severity incidents.
What the maker publishes
- Analytics
- The product lists a graphical user interface, NetFlow exports, QoS graphs, top protocols, and top talkers. source
- Appliance modes
- The download page lists bridge mode, tunnel mode, and network transparency among the product features. source
- Application visibility
- Central Manager documentation says Wanos identifies more than 200 Layer-7 and 7,000 Layer-4 applications. source
- Bridge and tunnel modes
- The appliance defaults to non-intrusive bridge mode and also supports tunnel mode for routed deployment. source
- Central management
- Wanos Central Manager is a web tool for monitoring and managing multiple appliances from one dashboard. source
- Company background
- Wanos Networks says it was founded in 2013 and operates out of Cape Town, South Africa. source
- Company headquarters
- LinkedIn lists Cape Town, South Africa as headquarters. source
- Company profile
- LinkedIn lists Wanos.co as a privately held technology company with 11–50 employees. source
- Deployment
- Wanos can be installed on dedicated physical appliances or run as virtual machines. source
- Deployment
- The product can run on dedicated physical appliances or as virtual machines. source
- Documentation depth
- Documentation is organized into Admin, Central Manager, knowledgebase and FAQ sections covering installation, deployment, configuration, troubleshooting, monitoring and video guides. source
- Encrypted traffic limitation
- Encrypted payloads generally cannot benefit from compression or deduplication because each transfer is encrypted differently, although TCP acceleration and QoS remain available. source
- Founded
- LinkedIn lists the company as founded in 2011. source
- Free edition limits
- Express is limited to version 3.2.3 and earlier, has a maximum of two licenses per client, and excludes professional support. source
- Headquarters
- No. 1 Bridgeway Road, Bridgeway Precinct, Century City, 7441 source
- Install formats
- Downloads include a raw disk image, OVA virtual appliance, VHD virtual appliance, an update package and an LXD Linux container. source
- Legal entity
- The website footer and EULA identify the maker as Wanos Networks Pty (Ltd). source
- Licence
- The Wanos software is proprietary, licensed per physical or virtual appliance, non-transferable and not modifiable under the EULA. source
- License scope
- License rates apply only to WAN outbound traffic, and pass-through traffic is not counted. source
- Limit: cost and complexity
- A G2 reviewer complained that data transfers incur ongoing cost and that projects can be complex and dependent on software security and third-party applications. source
- Limit: over-optimization
- A G2 reviewer reported that the system sometimes continued optimizing even when the connection was already fast. source
- Limit: product choice complexity
- A G2 reviewer said it can be difficult to determine the best solution because options vary by vendor. source
- Monitoring integrations
- SNMP v2c is supported but disabled by default, with MIBs and OIDs for peers, applications, talkers, sessions and system sensors. source
- NetFlow
- The download page lists NetFlow exports as an available feature. source
Checked against the maker's pages on 15 Oct 2026.