Skip to the content
Know your tech before you buy it. Makers: get listed from $49/mo

GSmartControl

gsmartcontrol.shaduri.dev

  • Free plan
  • Windows
  • macOS
  • Linux

What GSmartControl is

GSmartControl is a free graphical tool for inspecting drive health through smartctl, part of the smartmontools package. It shows drive identity, capabilities, SMART attributes and device statistics, and flags reported anomalies. Users can run drive tests, switch SMART on or off, and adjust global or per-drive smartctl options. It can also open saved smartctl output as a read-only virtual device for inspection. Supported drives include ATA (SATA and PATA) and NVMe, as well as some drives connected through USB bridges or RAID controllers. SCSI and SAS are not supported, though some information may be displayed. GSmartControl is available for Linux, Windows, macOS and several BSD and Unix systems; its downloads include installers, portable archives, packages and source code. smartmontools is a runtime requirement, but the official Windows packages include it. Useful operations require root or Administrator privileges. The software is free under GPLv3. Its documentation cautions that good SMART data does not ensure a drive will avoid failure.

Who it suits

It suits people who want a graphical way to inspect SMART data or run tests on supported drives. Users should be comfortable granting root or Administrator privileges and installing smartmontools where it is not bundled.

Good to know, and what to watch

  • Shows drive identity, SMART attributes and device statistics.
  • Automatically highlights reported anomalies.
  • Reads saved smartctl output as a read-only virtual device.
  • Supports ATA and NVMe drives.
  • Free software under GPLv3.
  • SCSI and SAS drives are unsupported.
  • Useful operations require root or Administrator privileges.
  • smartmontools is a runtime requirement outside official Windows packages.
  • Immediate Offline Tests are unsupported.

Free

Free

Free plan

Getting started

  1. Open the GSmartControl website
  2. Download the package for Linux, Windows, macOS, BSD, Solaris, or another listed system
  3. Install the application; non-Windows systems use smartmontools as a runtime requirement
  4. Launch GSmartControl with root or Administrator privileges
  5. Select a drive to inspect SMART data or run a supported test

Limits to check

SCSI and SAS drives are not supported, and Immediate Offline Tests cannot be run. Useful hardware operations require root or Administrator privileges.

The Club's review

Overview

GSmartControl is a desktop application for checking drive health and running tests through smartctl, the command-line utility in the smartmontools package. It suits people who want a visual way to inspect SMART data across supported systems, including administrators comfortable with elevated access. Its strongest case is straightforward: capable drive inspection without a software charge, within the limits of the hardware and SMART itself.

Key features

GSmartControl brings drive identity, capabilities, attributes and device statistics into one interface, and highlights anomalies automatically. That gives routine checks a useful starting point: potential problems are easier to notice, though interpreting the readings still matters. Good SMART data cannot guarantee that a drive will keep working.

The controls let users enable or disable SMART and set smartctl options globally or for individual drives. The app can also open saved smartctl output as a read-only virtual device. That is handy for reviewing a captured report when the original drive is unavailable, but the virtual device cannot be controlled.

Hardware support covers ATA drives, including SATA and PATA, and NVMe, as well as some drives connected through USB bridges and selected RAID controllers. SCSI and SAS are not supported, though some information about them may appear. Immediate Offline Tests are unavailable; they are described as mostly obsolete.

Useful operations require root or Administrator privileges because operating systems restrict direct hardware access. GSmartControl also relies on smartmontools at runtime. The official Windows packages include the required software and need no additional installation, while users on other systems should account for the dependency.

Pricing

There is one plan: Free, at no cost. It covers desktop drive health inspection and SMART monitoring under the GNU General Public License version 3. There are no paid tiers or feature upgrades to weigh, making it suitable for individuals and teams that can work within its supported hardware and privilege requirements.

Platforms

Packages are offered for Linux, Windows and macOS, with FreeBSD ports and source code also available. The requirements include Windows Vista SP2 or later, FreeBSD, NetBSD, OpenBSD, DragonFlyBSD and Solaris; QNX support is untested. The official Windows installers and portable archives include the required smartmontools software. Package choices across systems make it adaptable for desktop use, although availability does not remove the need for compatible drive hardware and administrator access.

Who it's for

GSmartControl is a good fit for desktop users and IT staff who want to inspect SMART health and launch supported drive tests without working only at a command line. Its saved-output reader also helps when reviewing previously captured data. Look elsewhere if you need SCSI or SAS support, or if your workflow depends on Immediate Offline Tests. Treat its anomaly flags as useful signals rather than assurance that a drive is safe.

Pros and cons

  • Pros: Free software with SMART monitoring across Linux, Windows, macOS and several BSD systems, with additional Solaris support.
  • Pros: Automatic anomaly reporting, drive details and configurable SMART controls put common inspection tasks in one graphical tool.
  • Pros: Saved smartctl output can be reviewed as a read-only virtual device, and official Windows packages include the runtime dependency.
  • Cons: Root or Administrator access is needed for useful operations, which can complicate checks on locked-down machines.
  • Cons: SCSI and SAS drives are unsupported, and Immediate Offline Tests are not available.
  • Cons: SMART readings cannot rule out drive failure, so the software is not a substitute for sound backup practices or broader diagnosis.

Alternatives

smartmontools is the direct choice for users who prefer its smartctl and smartd utilities without GSmartControl's graphical layer; it is also free and supports Linux, macOS and Windows.

Hard Disk Sentinel is worth considering for readers who want a paid alternative with a free trial and Linux and Windows availability.

DRevitalize offers a free older DOS version for readers seeking that specific option.

HDAT2 is a free Windows alternative for readers comfortable with its as-is, no-warranty terms and redistribution limits.

MHDD may suit users looking for freeware that runs on pure MS-DOS and supports IDE, Serial ATA and SCSI.

HDDScan is another free Windows option, with drive and controller compatibility varying by setup.

CrystalDiskMark has a free Windows desktop edition with installer, ZIP and source downloads; a Microsoft Store edition costs $9.99, paid once.

DiskMaster is a free alternative for Linux, macOS and Windows.

For more options, browse Disk Diagnostic Software, Hardware Diagnostic Software and Disk Health Monitoring Software.

Verdict

Choose GSmartControl if you want free, graphical access to smartctl inspection and supported drive tests across common desktop platforms. Its anomaly reporting, drive controls and saved-output reader give it practical range without a paid tier. Look elsewhere when you need SCSI or SAS support, cannot grant elevated access, or require a guarantee that SMART readings cannot provide.

The verdict

GSmartControl brings smartctl drive inspection and testing into a graphical interface, with useful support for saved output and anomaly reporting. Drive compatibility and administrator privileges are important limits, and good SMART data is not a guarantee against failure.

Questions people ask

Is GSmartControl free?

Yes. It is free software licensed under the GNU General Public License version 3.

Which operating systems are supported?

The listed systems include Linux, Windows, FreeBSD, NetBSD, OpenBSD, DragonFlyBSD, macOS, and Solaris, with untested QNX support also mentioned.

Which drives can it inspect?

It supports ATA drives, including SATA and PATA, NVMe drives, and some drives behind USB bridges or selected RAID controllers. SCSI and SAS drives are unsupported.

Does it require smartmontools?

Yes. GSmartControl uses smartmontools as a runtime requirement. Official Windows packages include the required software.

Do I need administrator access?

Yes. Root or Administrator privileges are needed for useful operations because operating systems restrict direct hardware access.

What the maker publishes

Anomaly alerts
It automatically reports and highlights anomalies. source
Anomaly reporting
The software automatically reports and highlights anomalies. source
Availability
The downloads page lists Linux distribution packages, Windows installers and portable archives, FreeBSD ports, macOS packages, and source code. source
Drive compatibility
It supports ATA (SATA and PATA) and NVMe drives, plus some drives behind USB bridges and RAID controllers. source
Drive controls
Users can enable or disable SMART and configure global and per-drive smartctl options. source
Drive information
It displays drive identity, capabilities, attributes, and device statistics. source
Drive information
It displays drive identity, capabilities, attributes, and device statistics. source
Drive limitation
SCSI and SAS drives are not supported, though the application may display some information about them. source
Integration
GSmartControl is a graphical interface for smartctl from the smartmontools package; smartmontools is a runtime requirement. source
License
GSmartControl is free software licensed under GNU General Public License version 3. source
License
GSmartControl is licensed under GNU General Public License version 3. source
Operating systems
The site lists Linux, Windows, FreeBSD, NetBSD, OpenBSD, DragonFlyBSD, macOS, Solaris, and untested QNX support. source
Privileges
Root or Administrator privileges are needed to perform useful operations because operating systems restrict direct hardware access. source
Purpose
GSmartControl is a graphical interface for smartctl that lets users inspect SMART data and run drive tests. source
Purpose
GSmartControl is a graphical interface for smartctl that lets users inspect SMART data and run drive tests. source
Runtime dependency
GSmartControl uses smartmontools, while official Windows packages include the required software. source
Saved output
It can read saved smartctl output as a read-only virtual device. source
Saved output
It can load smartctl output from a saved file as a read-only virtual device. source
SMART caveat
The documentation cautions that good SMART data does not guarantee a drive will not fail. source
SMART controls
It can enable or disable SMART and configure global and per-drive smartctl options. source
Support
Users are directed to report bugs through the GitHub issue tracker after consulting the troubleshooting page. source
Supported hardware
It supports ATA drives, NVMe drives, some USB bridges, and selected RAID controllers; SCSI and SAS drives are not supported. source
Supported operating systems
The requirements page lists Linux, Windows Vista SP2 or later, FreeBSD, NetBSD, OpenBSD, DragonFlyBSD, macOS, Solaris, and untested QNX support. source
Testing limit
Immediate Offline Tests are unsupported because they are described as mostly obsolete. source

Checked against the maker's pages on 9 Oct 2026.