Skip to the content
Know your tech before you buy it. Makers: get listed from $49/mo

HDAT2

hdat2.com

  • Free plan
  • Windows
7.0 Club score Visit hdat2.com

What HDAT2 is

HDAT2 is a drive diagnostic program for ATA, ATAPI, SATA, NVMe, SSD and SCSI/USB devices. Its device-testing functions check detected devices and can repair bad sectors. File-system testing covers MBR and GPT structures, boot data, and directories on FAT12/16/32, exFAT and NTFS. SMART tools are available for ATA/SATA, SCSI and NVMe drives. HDAT2 also includes SET MAX and Device Configuration Overlay controls, including a way to restore full drive capacity. Where supported, SATA and NVMe devices can be converted between 512e logical sectors and 4Kn. The program detects devices on AHCI and some RAID controllers, and can find USB devices through USB ASPI or BIOS support. The main program requires a real DOS system booted from USB, floppy disk or CD/DVD; the Windows version is only a demo. That demo runs at drive level, lacks file-level functions and aborts almost all commands while simulating conflicts. HDAT2 is free at no cost, for one or more machines, with redistribution without profit; it is provided as-is without warranty.

Who it suits

HDAT2 suits users who need to diagnose or test storage devices from bootable DOS media. It may also help technicians checking SMART data, file systems or bad sectors across supported drives.

Good to know, and what to watch

  • Tests and repairs bad sectors on detected devices.
  • Supports SMART functions for ATA/SATA, SCSI and NVMe.
  • Includes MBR/GPT and file-system testing.
  • Can restore full drive capacity.
  • Free for one or more machines.
  • The main program requires a real DOS system.
  • The Windows demo omits file-level functions.
  • The demo aborts almost all commands.
  • Versions 6.x/7.x support 32-bit AHCI only.

HDAT2 freeware

Free

Free plan

Getting started

  1. Open the HDAT2 website
  2. Prepare a DOS boot system on USB, floppy disk, or CD/DVD
  3. Create bootable media using the supplied DOS USB guide
  4. Boot the target machine into real DOS
  5. Run HDAT2 and select a detected storage device
  6. Use the Cookbook, manuals, or FAQ for guidance

Limits to check

The Windows demo is restricted to drive-level operation, provides no file-level functions, and aborts almost all commands while simulating conflicts. Versions 6.x and 7.x support 32-bit AHCI only and do not support AHCI Port-Multipliers.

The Club's review

HDAT2 is a low-level diagnostic and repair utility for storage devices, best suited to technicians and advanced users who are comfortable booting DOS. Its broad coverage makes it a strong fit for difficult drive, controller and file-system problems, but it is a poor choice if you need a normal Windows application.

Overview

HDAT2 works across ATA, ATAPI, SATA, NVMe, SSD and SCSI/USB devices. It combines device testing, bad-sector repair, file-system diagnostics, SMART functions and capacity-management commands in one free package. That breadth is valuable when a health check alone is insufficient, particularly for troubleshooting boot data, partition structures or unusual drive configurations.

The central limitation is its operating model. The full program requires a real DOS system booted from USB, floppy disk or CD/DVD. The Windows download is only a demonstration build, so it cannot provide the complete workflow from a modern desktop.

Key features

  • Drive testing and repair: HDAT2 performs read/write and other device-level tests and can test and repair bad sectors on detected drives. This is useful for isolating failing media, though repair work is inherently a task for users who understand the risk to data.
  • File-system diagnostics: Its file-system level checks MBR and GPT structures, boot data and directories on FAT12, FAT16, FAT32, exFAT and NTFS. That gives DOS operators considerably more than a surface scan.
  • SMART monitoring: SMART functions are available for ATA/SATA, SCSI and NVMe drives, providing another way to inspect device health across common storage interfaces.
  • Capacity controls: SET MAX and Device Configuration Overlay support includes restoring a drive's full capacity. Supported SATA and NVMe devices can also be converted between 512e and 4Kn logical sectors, which matters when sector format affects compatibility.
  • Controller and USB detection: The utility detects devices through AHCI and some RAID controllers, plus USB devices through USB ASPI or BIOS when supported. Compatibility is not universal: versions 6.x and 7.x support 32-bit AHCI only and do not support AHCI Port-Multipliers.
  • Security commands: SET SECURITY commands and drive-lock detection are exposed through the Security Menu, helpful when a device's security state is part of the diagnosis.
  • Documentation: The download page includes the HDAT2 Cookbook, user manuals, a DOS USB-creation guide and an FAQ, giving experienced users material for preparing boot media and interpreting the utility.

Pricing

HDAT2 freeware costs nothing for use on one or more machines. Redistribution is allowed without profit, and the software is provided as-is without warranty. There are no paid tiers to unlock additional functions, so the complete DOS program is the relevant choice for every user; the Windows demo is not a cheaper edition, but a restricted simulation.

Platforms

The full application runs on DOS and is intended to boot from removable media or optical disc. The minimum configuration is a 386/486 processor with coprocessor or higher, at least 1 MB of RAM and a DOS boot system. A Win32/64 demo, distributed as HDAT2WDEM_76.EXE, runs on Windows 32- and 64-bit systems.

The demo operates only at drive level, provides no file-level functions and aborts almost all commands while simulating conflicts. It is therefore suitable for getting a limited impression of the interface, not for completing diagnostics. Version 7.6, dated 19.03.2025, is the latest version listed.

Who it's for

Choose HDAT2 if you maintain older or mixed storage hardware, need file-system and boot-structure checks alongside SMART, or require capacity and sector-format controls. It is particularly appropriate for repair benches and administrators who can prepare dedicated DOS media.

Look elsewhere if your workflow must stay inside Windows, macOS or a contemporary Linux desktop, or if controller compatibility beyond 32-bit AHCI and non-multiplier setups is essential. The DOS prerequisite and limited Windows demo impose real operational overhead for routine health checks.

Pros and cons

Pros

  • Unusually broad scope: Device tests, bad-sector repair, file-system checks, SMART, security and capacity controls cover several diagnostic layers in one tool.
  • Wide storage coverage: ATA, SATA, NVMe, SSD, SCSI and supported USB devices are addressed.
  • Full functionality is free: The freeware plan permits use on one or more machines and non-profit redistribution.
  • Bootable operation: DOS media can be useful when an installed operating system cannot access a drive reliably.

Cons

  • DOS is mandatory for the real program: Users must create and boot dedicated media rather than launch a conventional desktop app.
  • Windows demo is heavily constrained: It lacks file-level work and aborts almost all commands, so it cannot replace the full utility.
  • Controller limits remain: 32-bit AHCI-only support in versions 6.x/7.x and no AHCI Port-Multiplier support can exclude current or specialized setups.
  • As-is licensing: The free plan includes no warranty, which places responsibility for data and repair decisions on the operator.

Alternatives

For a broader comparison, see Disk Diagnostic Software and Hardware Diagnostic Software.

  • Hard Disk Sentinel is the better pick for a paid, cross-platform health-monitoring workflow with Windows and Linux support, a free trial and a limited DOS plan.
  • GSmartControl suits users who want free desktop drive-health inspection on Linux, macOS or Windows.
  • smartmontools is preferable for command-line SMART utilities on Linux, macOS and Windows.
  • DRevitalize offers a paid Windows route, with an older DOS freeware edition for basic consideration.
  • MHDD is another free pure-MS-DOS option supporting IDE, Serial ATA and SCSI.
  • HDDScan is a free Windows alternative when its supported drive and controller compatibility matches your hardware.
  • CrystalDiskMark is better for straightforward Windows storage benchmarking rather than HDAT2's repair and file-system scope.
  • DiskMaster is a free desktop option for Linux, macOS and Windows.

Verdict

HDAT2 is the right choice for technically capable users who need deep, bootable diagnostics and repair across varied storage hardware without paying for a license. Its decisive advantage is the combination of device, file-system, SMART and capacity controls; its decisive drawback is that full access requires DOS, making a modern desktop alternative more practical for routine checks.

The verdict

HDAT2 offers broad drive and file-system diagnostics, with capacity controls and SMART functions. Its main limitation is the need to boot a real DOS system; the Windows demo is not a substitute for the full program.

Questions people ask

What does HDAT2 cost?

The freeware plan is free for one or more machines. Redistribution without profit is permitted, and the software is provided as-is without warranty.

Which systems can run the main program?

The main program requires a real DOS system booted from USB, floppy disk, or CD/DVD. A separate demo runs on Windows 32/64-bit systems.

What storage devices are supported?

HDAT2 tests ATA, ATAPI, SATA, NVMe, SSD, and SCSI/USB devices. It can also detect devices on AHCI and some RAID controllers, plus supported USB connections.

Does it repair bad sectors?

Its device-testing level tests and repairs bad sectors on detected devices.

Which file systems are covered?

File-system testing handles MBR/GPT, boot data, and directories on FAT12/16/32, exFAT, and NTFS.

Is SMART supported?

SMART functions are available for ATA/SATA, SCSI, and NVMe drives.

What the maker publishes

Capacity controls
The program implements SET MAX and Device Configuration Overlay features, including restoring full drive capacity. source
Controller support
HDAT2 detects devices on AHCI and some RAID controllers, and detects USB devices through USB ASPI or BIOS when supported. source
Demo limits
The demo operates only at drive level, does not provide file level, and aborts almost all commands while simulating conflicts. source
Documentation
The download page provides the HDAT2 Cookbook, user manuals, a DOS USB creation guide and an FAQ. source
File systems
Its file-system testing level handles MBR/GPT, boot data and directories on FAT12/16/32, exFAT and NTFS. source
Hardware minimum
The minimum configuration is a 386/486 CPU with coprocessor or higher, at least 1 MB RAM and a DOS boot system. source
Known limitations
Versions 6.x/7.x support 32-bit AHCI only and do not support AHCI Port-Multipliers. source
Operating mode
The main program requires a real DOS system booted from USB, floppy disk or CD/DVD; only the demo runs under Windows. source
Purpose
HDAT2 tests and diagnoses ATA, ATAPI, SATA, NVMe, SSD and SCSI/USB devices. source
Repair
Its device-testing level tests and repairs bad sectors on detected devices. source
Sector conversion
SATA/NVMe devices can be converted between 512e logical sectors and 4Kn when supported. source
Security features
The feature list includes SET SECURITY commands and drive-lock detection through the Security Menu. source
SMART
SMART functions are available for ATA/SATA, SCSI and NVMe drives. source
Version
The site lists version 7.6 dated 19.03.2025 as the latest version. source
Windows demo
The Win32/64 demo is distributed as HDAT2WDEM_76.EXE for Windows 32/64-bit systems. source

Checked against the maker's pages on 30 Sept 2026.